Overview
The Detroit Locker TrueTrac 915A550 is a limited slip differential for Ford 10.25 inch and 10.5 inch rear axles. It is an all gear driven, clutchless design with 35 splines, supplied as a complete limited slip assembly.
A limited slip differential sends torque from a slipping wheel to the wheel that still has grip. The TrueTrac does this automatically and smoothly. Because it uses no clutches, there are no clutch packs to wear out. The part carries the Eaton part code EAT915A550.
Key features
- All gear driven, clutchless limited slip differential design
- Automatically transfers power from the slipping wheel to the non-slipping wheel
- No clutches to wear out, which Detroit Locker says gives dependable, long lasting operation
- Fits Ford 10.25 inch and Ford 10.5 inch rear axles
- 35 spline axle compatibility
- Supplied as a limited slip assembly
Driving with a clutchless differential
A clutchless limited slip differential works differently from an open differential or a locking unit. Under normal road driving it keeps both rear wheels turning together, and the wheel with less grip is usually the first to spin when traction is lost. Off road, where one wheel may lift or sit on loose surface, sending drive to the wheel that still has contact can make steady progress easier. Because the gears do the work, drivers tend to notice how the vehicle pulls through a corner or a slippery patch rather than any sudden engagement.
Before fitting, check the axle type, carrier and ring gear compatibility, since a differential replacement often involves matching the pinion and bearing set. Many shops replace the axle seals, the pinion seal and the differential fluid at the same time, because access is already open. Once installed, watch for noise under load, vibration at speed, or leaks at the housing, and have a qualified technician look at any of these promptly. Keep the correct gear oil in the housing and follow the fluid change interval set for your vehicle.
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 915A550 |
| UPC | 70000293063 |
| Product type | Limited slip differential (TrueTrac) |
| Differential type | Limited slip assembly |
| Design | All gear driven, clutchless |
| Axle location | Rear |
| Axle type | Ford 10.5 inch or Ford 10.25 inch |
| Popular axle manufacturer | Ford |
| Axle splines | 35 splines |
| Manufacturer part code | EAT915A550 |
Vehicle fitment
It is a universal fit for Ford 10.25 inch or Ford 10.5 inch rear axles with 35 splines. Match the axle type, spline count and carrier requirements to your own axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Differentials normally install with a ring gear, bearings and carrier setup that require precise gear pattern and backlash adjustment. Axle work is safety-critical, so professional installation is the sensible choice. Replace seals and gaskets during the install, torque fasteners to the correct values, and re-check fluid levels and fasteners after the first miles of driving.








