Overview
The Detroit Locker 187C150A is an automatic locker for the rear of GM 12 bolt truck axles measuring 8.875 inch. It has 30 splines and is made by Eaton. It covers 3.73 and up gear ratios.
The unit sends torque to both rear wheels together and lets them turn at different speeds when the truck corners. It is suited to mud, snow, rock and track conditions. It is a truck axle part for the GM 12 bolt 8.875 inch housing.
Key features
- 100% of the torque to both drive wheels
- Constant drive mode in rough terrain
- Automatic speed differentiation when required
- 30 spline GM 12 bolt truck application
- Covers 3.73 and up gear ratios
Towing and loaded driving
A locked rear axle changes how a truck handles when pulling a trailer or carrying weight. Both wheels push together, so any tire-size difference shows up as tire scrub or a tugging feel in turns. Before towing, a truck with a locker benefits from equal tire diameter and sound wheel bearings.
Off road the locker is most useful on loose or uneven ground where one wheel tends to lose grip. On pavement, expect a firmer feel when turning at low speed. Keep an eye on the ring and pinion teeth after heavy loads, since the gears carry the full torque on every pull.
- Match tire diameter across the rear axle
- Expect a firmer feel when turning on pavement
- Check rear wheel bearings before a heavy tow
- Inspect ring and pinion teeth for chipping after heavy use
Specifications
| Brand | Detroit Locker |
|---|---|
| Manufacturer | Eaton |
| Part number | 187C150A |
| UPC | 70000010119 |
| Axle manufacturer | GM |
| Axle location | Rear |
| Axle type | GM 12 bolt 8.875 inches |
| Axle spline count | 30 splines |
| Gear ratio range | 3.73 and up |
| Differential type | Automatic locker |
Vehicle fitment
Fitment is set by axle, not by a vehicle year range. It matches the GM 12 bolt truck axle at 8.875 inches with 30 splines and 3.73 and up gearing. Check your axle tag and spline count before installation.
Other GM sizes or spline counts fall outside the stated match. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This unit is carrier work for a gear shop. Ring and pinion setup and bearing preload need checking, and the 3.73 and up gearing has to match the carrier. Break in the new gears gradually before towing or loaded driving. Support the axle and keep the truck on stands while the carrier is out.
What’s included
The automatic locker unit, part number 187C150A, is covered here. A carrier, ring gear or bolts are not included, so check the package contents against your installation before starting.






