Overview
The Detroit Locker 225S10 is an automatic locker for GM 14 bolt rear axles in the 10.5 inch size, with 30 splines, made by Eaton. It is built to send 100% of the engine torque to both rear wheels, which helps the vehicle keep moving on mud, snow, rocks and loose ground.
Unlike an open differential, the locker keeps both wheels in constant drive and lets them turn at different speeds only when needed, such as in a corner. Search by part number 225S10 when comparing GM 14 bolt lockers.
Key features
- Delivers 100% of the torque to both drive wheels
- Keeps both wheels in constant drive
- Lets wheel speeds differ automatically when required
- Automatic locker design for traction in mud, snow and rocks
- Suited to track use
Lockers and GM 14 bolt axles
A GM 14 bolt axle is a common base for trucks and vans that work hard. A locker on this housing keeps both rear wheels driving together, which helps on steep grades and in loose ground. The gears carry the full torque on every pull, so the setup and break-in matter.
When choosing a locker for this axle, the housing size and spline count come first. The gear ratio and carrier type come next. Once the locker is in, the rest of the drivetrain should be checked for wear, since the locked axle puts steady load through the gears and bearings.
- Confirm the 10.5 inch housing before buying
- Check the spline count on the axle shafts
- Have mesh and preload set by a gear shop
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 225S10 |
| UPC | 22501000001 |
| Manufacturer | Eaton |
| Axle manufacturer | GM |
| Axle type | GM 14 Bolt 10.5 Inches |
| Axle location | Rear |
| Axle spline count | 30 splines |
| Differential type | Automatic locker |
Vehicle fitment
It is matched to the GM 14 bolt 10.5 inch rear axle. Check the year, model and chassis code against your truck before buying.
Compare the axle housing size and 30 spline count with your axle before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An automatic locker is a gear-set installation that needs professional setup, including gear mesh and bearing preload, followed by a break-in period. Support the vehicle securely on stands before working under it.
What’s included
Professional setup is needed for gear mesh and bearing preload, followed by a break-in period. Support the vehicle securely on stands before working under it.








