Overview
The Detroit Locker 913A586 is a TrueTrac limited slip differential for Ford 9-inch rear axles, with 31 splines and Eaton as manufacturer.
This clutchless unit uses gears alone to transfer torque, so the rear wheel with traction receives power when the other wheel spins. Because no clutch packs are used, there is no friction material to wear.
Key features
- All gear driven limited slip, clutchless
- Transfers torque across to the gripping wheel
- No friction material to wear like a clutch pack
- Ford 9-inch rear axle, 31-spline fit
- Complete assembly
Ford 9 Inch gear setup
The Ford 9 Inch housing has been a common platform for performance and off-road builds, and gear setup is where most of the work happens. Ring and pinion backlash, tooth contact and bearing preload all affect how the carrier runs. Because a limited slip relies on gearing rather than clutches, a correct pattern matters a great deal for quiet operation.
Before installation, inspect the housing for cracks and check the axle tube seals. A clean, flat mating surface helps the cover seal properly. Many shops replace the pinion seal and cover gasket during a carrier change, and it is sensible to clean the housing so fresh gear oil reaches the new gearing.
- Check the housing for cracks
- Replace the pinion seal
- Clean the cover mating surface
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 913A586 |
| UPC | 70000366699 |
| Manufacturer | Eaton |
| Differential type | Limited slip assembly, all gear driven |
| Axle location | Rear |
| Axle type | Ford 9 inches |
| Axle manufacturer | Ford |
| Axle spline count | 31 splines |
Vehicle fitment
No vehicle years or models are given for this unit. It is identified only by Ford 9-inch rear axle size and a 31-spline count, so check those on your axle first.
Matching axle size and spline count is the first step, but the year, model and trim still need confirming. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The gear setup in this carrier, including backlash and preload, is best handled by an experienced differential installer. Keep the vehicle supported on stands while the axle is open.
What’s included
Check the package contents against your installation before starting, since bearings, shims and fasteners may need separate sourcing.







