Overview
The Detroit Locker Toyota 7.5 Inch Front TrueTrac, part number 911A445, is a front limited slip differential built for Toyota 7.5-inch front axles with 27 splines. A limited slip differential sends drive to the wheel that still has grip when the other wheel spins, which helps a vehicle keep moving on loose or uneven ground.
The TrueTrac uses all gear drive and no clutch packs, so there are no clutches to wear out. Detroit Locker positions it as a long lasting limited slip for off-road use. The manufacturer data lists universal fit, but the axle type and spline count decide whether the carrier matches your axle.
Key features
- All gear driven, clutchless design
- Moves power from a slipping wheel to the wheel with traction
- No clutch packs to replace over time
- Limited slip assembly for a Toyota 7.5-inch front axle
- 27 axle splines
Front axle work
Front differentials sit in a different place than rear units, so the job involves the front driveline, steering clearance and the axle shafts. Removing the carrier means the front axle shafts come out first, and the setup needs the same gear mesh and bearing preload checks as any other carrier. Plan on a full inspection of the front axle while it is open.
A limited slip front unit is most useful on loose or uneven ground where one front wheel can lose grip. Steering and driveline wear both affect how smoothly the unit works, so check the tie rods, ball joints and CV boots during the install. Front gear oil should be checked at regular service, and any leak at the carrier cover should be addressed quickly.
- Inspect CV boots and axle shafts while the carrier is out
- Check tie rods and ball joints for play
- Verify front gear oil level at each service
- Match the front axle size and spline count before ordering
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 911A445 |
| UPC | 70000010081 |
| Differential type | Limited slip assembly (TrueTrac) |
| Design | All gear driven, clutchless |
| Axle location | Front |
| Axle manufacturer | Toyota |
| Axle type | Toyota 7.5 Inches |
| Axle spline count | 27 splines |
Vehicle fitment
The 911A445 fits front axles that are Toyota 7.5 inch units with 27 splines. Fit depends on front axle size and spline count rather than on vehicle model.
Front axles of other sizes or spline counts, and rear housings, fall outside that fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Installing a differential means removing the axle shafts and carrier, then checking ring and pinion gear mesh and bearing preload. An axle shop with the right tools should handle that setup.
What’s included
Check the package contents against your installation before starting, including ring gear, pinion and carrier bolts.






