Overview
The Detroit Locker 225SL19B is an automatic locker for Dana 60 axles with 30 splines and a 4.10 down ratio. It puts engine torque into both wheels on the axle, so grip is shared when one wheel slips in mud, snow or over rocks.
Between turns the locker lets the wheels run at different speeds, and it locks again under drive torque. Because the ratio is 4.10 down, compare that figure with your existing gearing before choosing this part.
Key features
- Gives both wheels 100% of the drive torque
- Holds both wheels in constant drive
- Automatically permits wheel speed differences when needed
- 30 spline Dana 60 axle design
- It fits either the rear or front position.
Choosing between gear ratios
Gear ratio is one of the first decisions when adding a locker to a Dana 60. A down ratio changes how the engine turns the wheels, which affects low-speed pulling and highway cruising. Choose a ratio that suits the tires and the way the vehicle is used, and avoid mixing gearing that does not match the carrier.
Once the ratio is chosen, the ring and pinion must be set for correct tooth contact. A gear shop can check the pattern and preload during installation. After the first few drives, recheck the carrier bolts and listen for noise that changes with speed, which can signal a gear set problem.
- Match ratio to tire size and use
- Set tooth contact before the first drive
- Recheck carrier bolts after break-in
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 225SL19B |
| UPC | 70000010144 |
| Manufacturer | Eaton |
| Axle manufacturer | Dana |
| Axle type | Dana 60 |
| Axle location | Rear, Front |
| Axle spline count | 30 splines |
| Ratio listed | 4.10 Down |
| Differential type | Automatic locker |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. It is for Dana 60 axles with 30 splines and a 4.10 down ratio, in either position.
The Dana 60 names an axle family, so check the housing, spline count and ratio on your own axle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing a locker in a Dana 60 is a gear-set job with professional setup and a break-in period. Use rated stands and keep hands clear of the axle while it is supported.
What’s included
Check the package contents against your installation before starting.






