Overview
The Detroit Locker automatic locker, part number 162C66A, is made for a Dana 35 Super 30 axle with 30 splines and a 3.54 up ratio. It fits a rear axle location, and no specific vehicle, year or chassis code is named.
The unit sends torque to both drive wheels and lets them turn at different speeds when the vehicle needs it. It is intended for traction in mud, snow and rocks.
Key features
- Automatic locker that sends torque to both drive wheels
- Allows wheel speed differences when required
- Dana 35 Super 30 axle with 30 splines
- 3.54 up ratio
Carrier work and gear setup
Working on a Dana 35 Super 30 rear carrier means removing the cover, the carrier, and the gear set before the locker can be installed. Because the carrier holds the ring gear and pinion setup, it is worth taking time over measurements. Clean every part and check the bearing surfaces before reassembly.
Gear setup is where most problems start. Ring and pinion contact patterns, backlash and preload all affect noise and wear, and they should be set once the locker is in place. Working from a clear checklist helps, and a second set of eyes is useful for final checks before the axle goes back in service.
Keep the rear axle fluid fresh after the work, and recheck the fasteners after the first few drives. Early checks catch small issues before they grow.
- Clean all carrier surfaces before assembly
- Set backlash and preload with care
- Recheck fasteners after the first drives
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 162C66A |
| UPC | 16200660000 |
| Axle manufacturer | Dana |
| Axle type | Dana 35 |
| Axle location | Rear |
| Axle spline | 30 splines |
| Differential type | Automatic locker |
| Ratio | 3.54 up |
Vehicle fitment
It is an axle-specific part for a rear Dana 35 Super 30 with 30 splines and a 3.54 up ratio. Check your vehicle’s year, model and trim against the axle before buying.
A Dana 35 rear with different splines or gearing won’t match, even though the part is tagged universal fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing an automatic locker means opening the rear carrier, so professional installation and gear setup are recommended. Confirm the gear ratio and carrier spline count before starting work.
What’s included
Bearings, carrier parts and fasteners should be sorted out before the rear carrier is closed up.






