Overview
The Detroit Locker 915A567 is a rear TrueTrac limited slip differential for Dana 80 axles with 35 splines and 3.73 Down gearing. Like other TrueTrac units, it has an all-gear design with no clutches, so it delivers torque across the axle with gears and no friction packs.
Part number 915A567 identifies this rear Dana 80 unit, and its UPC is 70000365318. Eaton is the maker of this unit.
Key features
- Rear Dana 80 limited slip with 35 splines
- Clutchless, all-gear torque transfer
- 3.73 Down gearing
- Built on the Dana 80 axle type
Dana 80 duty and upkeep
The Dana 80 is a heavy-duty rear axle, and a limited slip in it carries load from both wheels during hard starts and climbs. Gear mesh and bearing preload set how the axle feels, so any carrier work should leave them correct before the vehicle returns to service. Tire size changes the effective ratio, so match the tires to the 3.73 Down gearing before installing the unit.
Because this is a clutchless design, it does not need clutch adjustment or replacement. Routine care centers on the gear oil and seals. Fresh gear oil with the right limited slip additive helps the gears run smoothly. Listen for changes in noise, watch for leaks at the cover and check for wheel play after rough trail use.
- Check the carrier bolts after the first few trail runs
- Keep the rear cover and seals free of leaks
- Replace worn axle shafts during carrier work
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 915A567 |
| UPC | 70000365318 |
| Axle location | Rear |
| Axle type | Dana 80 |
| Axle spline count | 35 splines |
| Gearing (title) | 3.73 Down |
| Differential type | Limited slip assembly |
| Popular axle manufacturer | Dana |
Vehicle fitment
It is a rear unit built for Dana 80 axles with 35 splines. Dana 80 names an axle family rather than a vehicle, so confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Dana 80 carrier work requires removing the carrier, setting gear mesh and preload, and checking the 3.73 Down ratio. An experienced drivetrain technician should set up the gear set before the axle goes back into service.
What’s included
The unit is the TrueTrac differential for part number 915A567. Check the package contents against your installation before starting, including whether axle shafts or carrier parts are needed.







