Overview
The Detroit Locker 915A568 is a rear TrueTrac limited slip differential for 11.5 Inch American Axle Manufacturing (AAM) axles with 30 splines. The axle type field names Chrysler 11.5 Inches AAM and GM 14 Bolt 11.5 Inches (AAM), so compare your axle against those names before choosing this unit.
Part number 915A568 identifies this unit, and the UPC is 70000474707. The TrueTrac design uses gears rather than clutch packs to shift torque toward the wheel with grip.
Key features
- 11.5 Inch AAM rear TrueTrac limited slip
- 30 spline axle count
- Clutchless, all-gear torque transfer
- Axle type lists both Chrysler and GM 14 Bolt AAM versions
AAM housing and carrier work
The 11.5 Inch AAM housing comes in more than one version, so confirm the axle name and spline count before buying. A carrier change involves ring and pinion mesh, bearing preload and backlash, and the result sets how quiet and durable the axle runs. A shop with gear setup experience should handle the work so the contact pattern is right before the vehicle returns to service.
A TrueTrac differential works through gears, so it has no clutch packs to adjust or replace. That keeps routine care simple: keep the gear oil clean, watch for leaks at the cover and axle seals, and listen for changes in noise under load. Off-road, the unit helps send torque to the wheel with grip, but tire choice and careful throttle still matter.
- Confirm housing name and spline count first
- Check the gear oil level after trail use
- Inspect axle seals and cover gasket during service
Specifications
| Brand | Detroit Locker |
|---|---|
| Part number | 915A568 |
| UPC | 70000474707 |
| Axle location | Rear |
| Axle type | Chrysler 11.5 Inches AAM; GM 14 Bolt 11.5 Inches (AAM) |
| Axle spline count | 30 splines |
| Popular axle manufacturer | American Axle Manufacturing |
| Differential type | Limited slip assembly |
Vehicle fitment
It is a rear unit for 11.5 Inch AAM axles with 30 splines, and it is made for the Chrysler and GM 14 Bolt versions of that housing. Confirm fit for your vehicle’s year, model and trim before ordering, and compare your axle housing and spline count first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
AAM 11.5 installations call for careful ring and pinion setup, including mesh and bearing preload, so a drivetrain specialist should handle the carrier. Verify the gear setup before the vehicle is driven.
What’s included
Nothing beyond the differential unit is described under part number 915A568, so the need for a ring gear, pinion or bearings is yours to confirm.







