Overview
The Daystar ComfortRide KC09124 is a 2 inch rear lift kit for vehicles with a Dana 60 rear axle. The kit is sold as a pair and includes blocks and bolts, so the rear ride height is raised by 2 inches.
Daystar builds its ComfortRide leveling kits to work within the factory suspension design. Daystar says nothing beyond the kit is needed for the install, and that any extra parts are named in the application description.
Key features
- ComfortRide suspension system, a lift kit for the rear
- 2 inch lift height
- Sold as a pair, rear only
- Includes blocks and bolts
- Made for the Dana 60 rear axle only
Rear lift and axle checks
A rear block kit raises the back of the truck without changing the rear axle itself, but the parts around the axle still move to a new position. Brake lines, rear shock lengths and the driveshaft angle can all change with ride height, so inspect them before the first long drive. Heavier loads and towing put extra strain on the rear, so tire load ratings and rear suspension bushings deserve a regular check.
Polyurethane blocks are made to handle routine use, but they should still be looked at during service. Bolts can loosen over time, and blocks can crack if they are over-torqued or exposed to heat from the exhaust. Keep the original hardware for reference, and check that the blocks sit square on the axle seat before final tightening.
- Check brake line length at full suspension travel
- Inspect the rear driveshaft angle after installation
- Recheck bolt torque after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | KC09124 |
| UPC | 618089001452 |
| Lift height | 2 inches |
| Position | Rear |
| Quantity | Pair |
| Rear axle | Dana 60 |
| Included hardware | Blocks and bolts |
Daystar says its leveling and lift kits work within the factory suspension design, and that everything needed is in the kit. Where extra items are required, such as longer shocks, the application description names them.
Daystar has developed more than 300 applications since it began making leveling kits in 1995. Torsion bar vehicles need a different method with re-indexed forged torsion keys, so this rear block kit is not a torsion key product.
The kit is black and made of high density progressive polyurethane, and it raises the rear 2 inches. The polyurethane design is intended to keep ride quality and load-carrying capacity in place.
This is a rear-only lift, and it is a 2 inch rear leveling kit.
Vehicle fitment
It is built for the Dana 60 rear axle only. Confirm your vehicle has a Dana 60 rear before ordering.
Installation notes
Confirm the Dana 60 rear axle before ordering, since a different rear axle will not match the blocks. Check the rear shocks and brake lines for length after the lift is installed.
What’s included
Included: a pair of rear lift blocks and the bolts that go with them.









