Overview
The Pro Comp K5080BX is a 6-inch stage 1 lift kit with Pro-VST front coilovers and Pro-VST rear shocks for the 2012–2015 Toyota Tacoma. The lift height range is 6 to 7 inches, and the shocks are included with the kit.
The rear is raised with a block/spacer design using block and U-bolt components with add-a-leaf hardware. The kit is a direct fit for the Base, Pre Runner, TRD Pro and X-Runner versions of the 2012–2015 Tacoma.
Key features
- 6-inch stage 1 lift for the 2012–2015 Tacoma
- Pro-VST front coilovers and Pro-VST rear shocks, included
- Block and U-bolt rear lift with add-a-leaf hardware
- Lift height range of 6 to 7 inches
- It is a direct fit for the TRD Pro version of these model years.
Choosing the right setup
A coilover front paired with a block rear is a mixed setup, so the spring rates and damping at each end should be considered together. The front coilovers manage weight transfer under braking, while the rear block lift changes the axle position. Matching the two ends keeps the truck stable on pavement and on rough roads.
Coilovers and rear shocks are usually replaced as a pair when a lift is installed, because the ride height and damping need to suit the new geometry. Inspect the coilover mounts, spring perches and the rear shock bushings during service. Look for leaks, cracked bushings or uneven wear as signs that a part needs attention.
- Match front and rear damping for a stable ride.
- Inspect coilover mounts and spring perches regularly.
- Check rear shock bushings for cracking or wear.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5080BX |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | Pro-VST coilovers |
| Rear shocks | Pro-VST, included |
| Rear lift method | Block/spacer with block and U-bolt and add-a-leaf |
| Shocks included | Yes |
Vehicle fitment
The kit is a direct fit for the 2012–2015 Toyota Tacoma in the Base, Pre Runner, TRD Pro and X-Runner versions.
It does not fit the 2011 and older Tacoma, the 2016 and newer Tacoma, the 4Runner or the Tundra. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The coilovers at the front and the block lift at the rear change the ride height, so check the driveline angles and the alignment once the kit is installed.
What’s included
Pro-VST front coilovers, Pro-VST rear shocks, and the block and U-bolt rear lift components with add-a-leaf hardware.













