Overview
The Rancho 2-inch Level It Lift Kit, part number RS66503R7, levels the front of 2009 to 2013 Ford F-150 pickups by raising the front 2 inches. It uses two RS7000MT monotube leveling struts and two sway bar spacers, and it needs no steering correction.
The sway bar spacers correct the end link angles, which controls roll and sway. The kit is designed for 35-inch tires on 18-inch rims with 5.5 inches of backspacing, and it allows the factory wheels and tires to be reused.
Sway bar spacers correct the end link angles to control roll and sway. Mounting hardware is included with the struts and spacers. The rear is not lifted, so the lift is applied only at the front.
The kit is designed around 35-inch tires on 18-inch rims with 5.5 inches of backspacing, and it allows the factory wheels and tires to be reused.
Key features
- 2-inch front lift from leveling struts
- Two RS7000MT monotube leveling struts
- Two sway bar spacers that correct end link angles
- Mounting hardware included
- Factory wheels and tires can be reused
Before you level
A front-only leveling kit raises the nose and brings the truck closer to level, but it changes how the front and rear sit together. The rear stays at factory height, so the vehicle can look slightly unbalanced if the rear springs are tired. Keep an eye on the stance after installation.
Front suspension changes affect alignment, so schedule a wheel alignment after installing the struts and spacers. Headlight aim also shifts when the front rises, and the steering geometry may need a check if the tires show uneven wear.
- Aim the headlights after the front is raised
- Check the bump stops and brake hose length
- Inspect the factory shocks before reusing them
- Confirm rear shock needs before adding any rear lift
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS66503R7 |
| UPC | 39703007542 |
| Front lift | 2 inches |
| Front lift method | Leveling struts |
| Rear lift | None |
| Steering correction | None required |
| Design tire size | 35 inches on 18-inch rims, 5.5-inch backspacing |
| Coil springs | Not included |
| Rear shocks | RS7000MT, needed separately |
Vehicle fitment
The kit fits 2009 to 2013 Ford F-150 pickups.
Other F-150 years are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two RS7000MT monotube leveling struts, two sway bar spacers and mounting hardware. Not included: coil springs and rear RS7000MT shocks.











