Overview
The Daystar KJ09116BK is a 2.5-inch suspension lift for the 2003–2007 Jeep Liberty (KJ). It combines front leveling parts with rear spacers to raise the vehicle while keeping the factory suspension design.
Daystar builds its lifts to work within the factory parameters, so the kit adds no extra modifications beyond what it includes. Everything needed comes in the box. Longer shocks are not included, and the kit is intended to help the Liberty clear larger tires and gain ground clearance without sacrificing ride quality or load capacity.
Front leveling and rear spacers are separate lift methods, so the front and rear heights come from different parts. A leveling kit lifts only the front, which brings a nose-down Liberty level. Check the front leveling parts against the rear spacers once the kit is installed.
The title’s 2.5-inch figure sits inside the 2 to 3 inch range that Daystar gives for this kit.
Shock length is not part of this kit, so the shocks should be checked against the new ride height.
Key features
- High-density progressive polyurethane construction
- Lifts the vehicle without sacrificing ride quality or load capacity
- Maximum recommended tire size of 245/75/16
- Improves ground clearance
- Front leveling and rear spacer lift in one kit
- Everything needed for installation is included
Choosing a lift height
Lift height is a balance between clearance and how the vehicle drives. A small increase helps level a stock stance and makes room for tires, while taller changes need more attention to steering, brakes and driveline angles. Decide on the goal first, because a mismatch between front and rear height can change the ride noticeably.
A leveling kit suits owners who want the front raised to match the rear, and spacers at the rear add height behind the axle. When both are used, confirm that the front and rear heights match the tires planned. Mismatched heights can change how the vehicle tracks and how the tires wear across the axle.
Parts that are not replaced with the lift often show their age once the ride height changes. Look at bushings, shock mounts and sway bar links during installation. Replacing worn items at the same time saves a second teardown later.
- Front and rear height match
- Shock length at the new height
- Sway bar link condition
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ09116BK |
| UPC | 814423010764 |
| Lift range | 2 to 3 inches |
| Suspension type | Leveling kit and body lift combo |
| Rear lift method | Spacers |
| Material | High-density progressive polyurethane |
| Maximum tire size | 245/75/16 |
| Shocks included | No |
Vehicle fitment
It is made for the 2003–2007 Jeep Liberty (KJ).
The list does not cover Liberty model years outside 2003–2007, and other Jeep models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the front and rear lift are set separately, check the driveline angles and alignment after installation, and make sure the front and rear heights match the tires you plan to run.
What’s included
The full kit with front leveling parts, rear coil spring spacers and the hardware needed for installation.
Not included: Shocks.









