Overview
The Skyjacker 174EPK-H is a 4 inch lift kit with coil springs at the front and lift blocks with add-a-leaf at the rear. It is for the 1966–1972 Ford F-100 in the Base trim, and the kit includes front and rear hydro shocks with shock boots. The lift height range is 3 to 4.99 inches.
The front coil springs replace the original front height, and the rear is raised with lift blocks, U-bolts and an add-a-leaf. The hydraulic shocks are part of the package, with shock boots fitted to the front and rear units.
Key features
- Front coil spring lift
- Rear lift blocks with add-a-leaf
- Front and rear hydro shocks with shock boots
- Lift height range 3 to 4.99 inches
Before you lift
A 4 inch lift changes several things beyond ride height. Raising the front with new coil springs and the rear with lift blocks shifts the axle angles, so the driveline, brake hoses and steering linkage all need a look after the work is finished. Plan the install so the rear axle is supported properly while the U-bolts and add-a-leaf are fitted.
Hydraulic shocks are part of this kit, so they should be checked for leaks and mounting clearance once the truck is back at ride height. Because the front and rear change together, a wheel alignment after the lift is a sensible step, and tire rub should be checked at full compression. A lift set up as a complete system tends to handle more predictably than one with mismatched parts.
- Check brake hose length after the rear is raised
- Inspect shock boots for tears after installation
- Recheck U-bolt torque after the first few drives
- Set an alignment once the ride height settles
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 174EPK-H |
| UPC | 70000229526 |
| Suspension type | Coil spring kit |
| Lift height range | 3 to 4.99 inch |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Shocks | Hydro, front and rear, with shock boots |
| Max tire size | 35 x 12.5 |
| Wheel size | 15 x 10 |
| Backspace | 4 |
Vehicle fitment
The listed fitment is the 1966–1972 Ford F-100 (Base). Trucks from other years, and the Ford F-100 in other trims, are not part of that list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear lift block kit changes the pinion angle, so check the driveline angle after installation. The add-a-leaf and U-bolts are part of the rear lift method, so they should be fitted as a set.
What’s included
Front coil springs, rear lift blocks with add-a-leaf and U-bolts, four hydro shocks with shock boots, and the mounting hardware for the kit.









