Overview
The Skyjacker 236RHKS-A is a Class 2 suspension lift kit for a 6 inch lift. It includes front coil springs and rear leaf springs, along with radius arms, hinge brackets, a pitman arm, bump stops, sway bar links and a rear U-bolt kit. It is made for the 1983–1997 Ford Ranger and the 1994–1997 Mazda B4000, and the lift height range is 5 to 6.99 inches.
The kit uses radius arm brackets to locate the axle. The shocks are included with the package. Because the kit replaces the front and rear springs and adds the radius arms, it is a full suspension system rather than a spring-only lift.
Key features
- 6 inch lift, Class 2 suspension
- Front coil springs and rear leaf springs
- Radius arms and hinge brackets
- Pitman arm, bump stops and sway bar links
- Rear U-bolt kit included
Radius arm setup and alignment
Radius arms control axle wrap and fore-aft location, which is why this type of lift handles acceleration and braking more predictably than a leaf-only setup. The arms also set the pinion angle, so the driveline needs checking after installation. A kit of this scope usually changes the front alignment too.
Steering components are often replaced along with the suspension, since the pitman arm and tie rod ends carry the new steering geometry. Inspect the bump stops and sway bar links at each service interval, because worn links can cause clunks over bumps. Shock travel and axle angle should be checked through full suspension compression.
- Get a full alignment after installation
- Check the pitman arm and drag link for play
- Inspect radius arm bushings for cracks
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 236RHKS-A |
| UPC | 803696105970 |
| Lift height | 6 inch, range 5 to 6.99 inches |
| Suspension type | Radius arm or radius arm brackets |
| Class | Class 2 |
| Shocks | Included |
| Fitment type | Direct fit |
Vehicle fitment
The listed fitment is the 1983–1997 Ford Ranger (Base, Custom, S, STX, Splash, Sport, XL, XL Sport, XLS and XLT) and the 1994–1997 Mazda B4000 (Base, LE and SE).
Ranger years after 1997 and other Mazda models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A radius arm lift changes the axle location and the pinion angle, so the driveline and alignment should be checked after installation. The pitman arm and sway bar links are part of the kit and should be installed with the rest of the steering and suspension parts.
What’s included
Front coil springs, rear leaf springs, radius arms, hinge brackets, a pitman arm, bump stops, sway bar links and a rear U-bolt kit. Shocks are included.









