Overview
The Daystar KJ09153BK is a 3-inch suspension lift kit with front and rear coil spacers, bump stop extensions, front and rear shocks, a front track bar bracket and a hardware kit. It fits 2-door and 4-door models and accepts a maximum tire size of 35×12.50. Before ordering, confirm fit against your vehicle’s year, model and trim.
The kit raises ride height within the factory suspension design, so few other modifications are needed. Rear sway bar brackets are included. Any extra parts a given vehicle may need, such as longer shocks, should be confirmed before installation.
Key features
- 3-inch lift height
- Front and rear coil spring spacers
- Front and rear shocks
- Front track bar bracket
- Rear sway bar brackets
- Bump stop extensions
Before you install the kit
A suspension lift changes the geometry the factory parts were built around, so the front end and driveline deserve attention alongside the spacers. Coil spacers raise the body without changing the spring rate, which is why a spacer kit is often paired with shocks suited to the new ride height. Check brake lines, steering linkage and driveline clearance once the kit is in place.
Bump stop extensions limit how far the axle can compress, so they matter most on rough ground where the suspension travels its full range. Worn ball joints, tie rod ends and bushings carry more load at a higher ride, so inspect them before the install and replace any with play.
- Re-torque spacer and bracket hardware after the first few drives
- Look for cracks or shifting in the coil spacers after hard trail use
- Recheck the track bar position whenever the front end is serviced
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ09153BK |
| UPC | 814423019453 |
| Lift height | 3 inches |
| Front | Coil spring spacers, track bar bracket, shocks |
| Rear | Coil spring spacers, sway bar brackets, bump stop extensions, shocks |
| Max tire size | 35×12.50 |
| Body style | 2-door and 4-door |
Vehicle fitment
The kit covers a lift range of 3 to 4.99 inches and suits 2-door and 4-door bodies. Check fit for your year, model and trim before you order.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a front track bar bracket, so check the track bar position after the spacers and brackets are installed. Recheck the alignment once the lift is complete.
What’s included
Front and rear coil spring spacers, front and rear shocks, a front track bar bracket, rear sway bar brackets, bump stop extensions and a hardware kit.








