Overview
The Daystar KJ09177BK is a 2-inch suspension lift for 2018 to 2020 Jeep Wrangler JL models, sold under part number DAYKJ09177BK. It fits all 2018 to 2020 Wrangler JL models, both two-door and four-door (Unlimited). It fits 35-inch tires on all models and 37-inch tires on Rubicon versions.
The rear uses a block and spacer method, and the front and rear shocks are the factory units, reused rather than replaced. The kit does not include shocks. The lift height range is 0 to 3.5 inches.
Key features
- 2-inch lift for Wrangler JL models
- 35-inch tire fitment on all models
- 37-inch tire fitment on Rubicon models
- Rear block and spacer lift method
- Factory front and rear shocks reused
- Lift height range of 0 to 3.5 inches
Checking reused shocks
Because the factory shocks stay on the truck, their condition decides how the lifted Wrangler rides. Worn shocks let the body bounce and can cause uneven tire wear, which is easy to miss once the truck sits higher. Inspecting them before the lift goes on gives a clear baseline and avoids blaming the new parts for an old problem.
The suspension geometry changes with any lift, so the steering and handling will feel different afterward. Tires matter too: larger sizes add load and can rub at full steering or compression. Spend time checking the clearance and the driveline angles before taking the truck off road.
- Look for leaks, dents or a loose mount on each shock
- Check tire clearance at full steering lock
- Recheck the alignment after the first road test
Specifications
| Brand | Daystar |
|---|---|
| Part number | DAYKJ09177BK |
| Lift kit size | 2 inches |
| Tire size | 35 inches on all models; 37 inches on Rubicon |
| Rear lift method | Block and spacer |
| Rear lift component | Spacer |
| Front shocks | Factory, reused |
| Rear shocks | Factory, reused |
| Shocks included | No |
| Lift height range | 0 to 3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2018 to 2020 Jeep Wrangler JL models. The two-door entries cover the Rubicon and Sport and Sport S versions, and the four-door Unlimited entries cover the Moab, Rubicon, Sahara, Sport and Sport S versions.
Before ordering, match your Wrangler or Gladiator’s year, model and trim against the covered years and versions.
Installation notes
Because the factory shocks are reused, their condition should be checked before installation, since they are not replaced by the kit. The lift changes suspension geometry, so a wheel alignment and a driveline angle check belong after installation. The 37-inch tire size applies to Rubicon models only, so fit should be checked before the tires are mounted.
What’s included
The kit includes a spacer as the rear lift component. Check the package contents against your installation before starting.
Not included: Shocks. The factory front and rear shocks are reused.







