Overview
Trail Gear Magnum knuckle studs are heavy-duty replacements for Toyota steering knuckles, with a longer length than stock. They are designed to be stronger than stock replacement Toyota knuckle studs.
Trail Gear has the studs made to its specifications by ARP (Automotive Race Products). Each stud is made from ARP 2000 material and hardened to 220,000 PSI. The studs are one-quarter inch longer than stock so they can work with aftermarket steering arms.
Key features
- Heavy-duty magnum design, longer than stock
- Integrated 8mm hex head for removal with common tools
- ARP 2000 material
- Hardened to 220,000 PSI
- Designed to accommodate aftermarket steering arms
Steering knuckle service
The steering knuckle carries the hub, bearings and steering arm, so the studs that hold the knuckle to the steering arm take real load on rough trails. Replacing worn studs together with bearings and tie rod ends keeps the assembly tight and avoids repeat work. Clean the stud bores and check for cracks or elongated holes before installing new studs.
When a longer stud is used with an aftermarket steering arm, check the arm’s bore depth and thread engagement so the nut seats fully. Tighten to the specified torque, then re-check after the first trail trips. An alignment is generally recommended after steering arm or stud work, since the geometry can shift.
- Clean and inspect the knuckle bores
- Replace worn bearings and tie rod ends together
- Re-check nuts after the first trail runs
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140171-1-KIT |
| UPC | 70000621294 |
| Stud type | Magnum knuckle stud |
| Head | Integrated 8mm hex |
| Material | ARP 2000 |
| Hardness | 220,000 PSI |
| Length | One-quarter inch longer than stock |
| Made by | ARP (Automotive Race Products), to Trail Gear specifications |
Vehicle fitment
They fit the stock Toyota knuckle stud position, so confirm the stud position on your knuckle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The longer studs are meant for aftermarket steering arms, so check that your arm accepts the extra length before installing. The 8mm hex head allows removal with common hand tools.
What’s included
Check the package contents against your installation before starting.









