Overview
The Dana Spicer 706030X is an outer pinion bearing kit for Dana 25, 27, 30 and 44 axles. The kit includes one bearing and one cup, and the cup is the outer race the bearing rolls against.
Pinion bearings hold the drive pinion in the carrier, so the bearing and cup are normally replaced together as a matched pair. No vehicles are named, only axle models.
Before you install
A pinion bearing carries load every time the drive pinion turns, so the bearing seat and the cup seat both need to be sound. Before pressing in a new cup, look at the carrier bore for scoring, pitting or heat discoloration. Damage in the bore will shorten a new bearing’s life, so address it before reassembly.
Bearings and cups wear as a pair, and a new bearing running on a worn cup often fails early. Keep both parts in their packaging until fitting, and work with clean tools and fresh gear oil. Record the shim or sleeve thickness during teardown so the preload work starts from a known point, and take your time setting it.
- Check that the cup sits square against the carrier shoulder
- Inspect the pinion yoke and seal surface for grooves
- Replace the crush sleeve if preload is being reset
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706030X |
| Contents | One bearing and one cup |
| Axle models | Dana 25, 27, 30 and 44 |
| Position | Outer pinion |
Vehicle fitment
This kit fits by axle model, covering Dana 25, 27, 30 and 44 axles. Match the bearing to your axle model and confirm the bearing size against your axle before ordering.
Fit is set by axle model, not by vehicle year, make or model. Make sure your vehicle’s year, model and trim match the axle before ordering.
Installation notes
Pinion bearing preload is set with a crush sleeve or shims, and a qualified technician should set it. Preload that is too tight or too loose will shorten bearing life.
What’s included
One bearing and one cup.
Not included: The pinion gear, ring gear, crush sleeve and pinion seal are separate parts and are not part of this kit.









