Overview
The Dana Spicer 706046X is an inner pinion bearing for the differential pinion. It supports the pinion gear shaft inside the carrier and carries load as the driveshaft turns the gear.
It is a universal fit bearing, so no specific vehicle is identified. Its drivetrain components are precision engineered and put through rigorous testing to the standards used for OE manufacturers.
Key features
- Inner position for pinion gear support
- Dana Spicer part number 706046X
- Brand reports rigorous testing of its drivetrain parts
- Universal fit designation from the brand
Choosing a pinion bearing
A pinion bearing sits inside the carrier and holds the pinion gear shaft in position while the driveshaft turns the gear. Under load it carries thrust and radial forces from the gear mesh, so its condition affects gear alignment, noise and how well the pinion holds its preload. When choosing a replacement, the bearing size and race type must match the carrier and pinion, since a bearing that looks similar can still be the wrong dimension for the housing.
Pinion bearings are usually replaced as part of a set with the crush sleeve or spacer, the pinion seal and, when gears are being changed, the matching ring and pinion. Replacing only one part can leave the others worn and make preload hard to set. Signs of a worn bearing include rough or growling noise under load, play in the pinion shaft when it is rocked by hand, and metal in the differential fluid. Rebuilding the pinion requires a fresh preload measurement, which is why a qualified technician is usually the safer choice.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706046X |
| Part type | Inner pinion bearing |
| Fitment | Universal fit |
Vehicle fitment
This bearing is universal fit, so it is not tied to a specific year, model or trim. Bearing size depends on the carrier and pinion, so match the part number to your axle before installing.
It is a universal fit bearing, so it is not tied to a specific year, model or trim. Match the part number to your carrier and pinion before installing, and confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Pinion bearing preload has to be set correctly, so a qualified technician should handle installation and check the gear mesh afterward.
What’s included
Only the inner pinion bearing is described. No seal, spacer or hardware is named as included.









