Overview
The Crown Automotive 4864210 is an outer pinion bearing kit for the Dana 44 axle and is a direct fit. It fits 1976–1983 and 1976–1986 Jeep CJ5 and CJ7 models, 1999–2004 and 2006–2008 Grand Cherokee (WJ and WK), 1994–1998 Grand Cherokee (ZJ), 1980–1986 and 1986 J10 and J20 trucks, 1981–1985 Scrambler and 2007–2018 Wrangler JK.
The kit is for 2- and 4-door models of the Dana 44. The bearing is for the outer pinion position.
Key features
- Outer pinion bearing position
- Dana 44 axle use
- Fits 2- and 4-door models
- Direct fit for the listed Dana 44 applications.
Pinion bearing setup
The outer pinion bearing carries the pinion shaft and works with the inner bearing to hold the pinion in place. When the pinion is out, the bearing races should be inspected for pitting, and the pinion seal should be replaced. Worn inner bearings or a damaged crush sleeve are often found at the same time, so inspect them while the axle is apart.
Preload is the key setting. Too little preload lets the pinion move under load, while too much overheats the bearings. Set preload to the service manual specification and check the rolling torque with a suitable gauge after assembly. Keep the bearings clean and avoid mixing parts from different kits.
- Inspect the inner bearing and pinion seal
- Check the pinion yoke for play
- Record preload before and after assembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4864210 |
| UPC | 848399075045 |
| Axle type | Dana 44 |
| Position | Outer pinion |
| Body style | 2- and 4-door models |
| Fitment | Direct fit |
Vehicle fitment
It fits 1976–1983 and 1976–1986 Jeep CJ5 and CJ7, 1999–2004 and 2006–2008 Grand Cherokee WJ and WK, 1994–1998 Grand Cherokee ZJ, 1980–1986 and 1986 J10 and J20, 1981–1985 Scrambler and 2007–2018 Wrangler JK.
The Wrangler TJ, LJ and JL are outside this fit. Check your year, model and trim against this application before ordering.
What’s included
One outer pinion bearing kit.









