Overview
The Dana Spicer Inner Pinion Bearing Set, part number 707162X, is the inner bearing and cup for a differential pinion. Pinion bearings hold the pinion shaft in position inside the carrier, and the inner bearing is the one closest to the ring gear.
It is sold as one bearing and one cup, the inner bearing only. Confirm the part number against your differential before choosing this set.
Pinion bearing basics
The pinion shaft runs on two bearings inside the carrier, and the inner bearing sits closest to the ring gear. Pinion bearing preload is set with a spacer and a collapsible sleeve, so the bearing, cup and sleeve work as one assembly that must be set to a specific feel rather than a fixed tightness.
Pinion setup is precise work. A worn cup or bearing that is replaced alone can change the preload, so replacing the bearing and cup together is the common practice. Check the carrier bore for wear before reinstalling, and take the setup to a shop with experience in pinion work.
- Replace the bearing and cup as a matched pair
- Check the carrier bore for scoring before reinstalling
- Replace the crush sleeve whenever the pinion is removed
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 707162X |
| Position | Inner pinion bearing |
| Set contents | 1 bearing and 1 cup |
Vehicle fitment
Universal Fit is the only fitment tag. Confirm the bearing matches your differential by part number and by the bearing it replaces before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Setting preload on the inner bearing is part of pinion setup, so have an experienced shop install and set this bearing.
What’s included
The set includes one bearing and one cup. Not included: the outer bearing, crush sleeve and pinion seal, which are separate parts.









