Overview
The Dana Spicer Outer Pinion Bearing Set, part number 706894X, is an outer bearing and cup for a differential pinion. The outer bearing sits on the pinion shaft at the end away from the ring gear, where it carries the pinion load and helps keep it aligned.
It is identified by brand, part number and outer bearing position. Confirm fit for your vehicle’s year, model and trim before ordering.
Pinion bearing basics
The outer pinion bearing carries much of the pinion’s thrust load and keeps the shaft steady as the gears turn. Because it sits at the open end of the carrier, it is often the first bearing a shop checks when a pinion whine develops. Damage usually shows as rough rotation, play or discoloration on the cup.
Bearings are normally replaced as a matched pair with the cup, and the inner bearing is often replaced alongside it when the carrier is apart. Clean the carrier bore thoroughly before pressing in a new cup, and keep the bearing lubricated with clean gear oil. Set preload with a gauge rather than by feel.
- Replace the bearing and cup as a matched pair
- Clean the carrier bore before pressing the cup
- Set preload with the pinion nut and a gauge
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 706894X |
| Position | Outer pinion bearing |
| Set contents | 1 bearing and 1 cup |
Vehicle fitment
Compare the part number against the outer bearing you are replacing before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation involves pressing the cup into the carrier and setting preload with the pinion, which is best left to a shop experienced with pinion work.
What’s included
The set includes one bearing and one cup. Not included: the inner pinion bearing, crush sleeve and pinion seal, which are separate parts.









