Overview
The Dana Spicer NP203/205 1410 Series Transfer Case Yoke, part number 3-4-10951-1, is a replacement yoke for NP203 and NP205 transfer cases in the 1410 Series. It is sold as a new part, which makes it an option for repairs or upgrades instead of a worn used yoke.
The yoke is labeled Universal Fit. A transfer case yoke still has to match the case it goes on, so confirm the NP203/205 1410 Series designation against your transfer case before buying.
Key features
- Replacement yoke for NP203 and NP205 transfer cases, 1410 Series
- Offered as a new part instead of a used yoke from a salvage yard
- Dana Spicer part number 3-4-10951-1
- Universal Fit label
Yoke replacement basics
The yoke connects the driveshaft to the transfer case output, so its splines and seal surface take constant wear. A new yoke removes the grooves and pitting that a used yoke may carry, which helps a replacement seal seat and hold. Inspect the output shaft splines and the mating surfaces as well, since a damaged shaft can wear a new yoke quickly.
When changing a yoke, remove the pinion nut or retaining nut with the correct tools and check the threads for damage. Replace the seal and any worn washers at the same time, and clean the surfaces before fitting. Check for leaks after the first drive and recheck the fastener once the vehicle has been driven.
- Inspect the output shaft splines for wear
- Replace the yoke seal during the job
- Check the driveshaft flange for damage
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 3-4-10951-1 |
| Transfer case series | NP203/205 1410 Series |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicles are named for this yoke. Fit depends on the transfer case model and series, so confirm the NP203 or NP205 model before ordering.
Confirm the NP203 or NP205 transfer case model and your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.








