Overview
The Trail Gear 100116-3-KIT is a driveline adapter yoke that bolts a Suzuki Samurai driveline to a Toyota axle or transfer case without modifying the drive shaft. It fits 1986–1995 Suzuki Samurai models in Base, JA, JL, JS, JX and JX SE trims.
Trail Gear built the adapter with two Samurai drive shaft patterns, one for 1986–89 shafts and one for 1990–95 shafts, so the same kit covers both groups of Samurai driveshafts.
Key features
- Two Samurai drive shaft patterns: 1986–89 and 1990–95
- Bolts a stock Samurai driveline to a Toyota axle or transfer case
- Keeps the original drive shaft unmodified
- Trail Gear part number 100116-3-KIT
Driveline angles and joints
Swapping the axle or transfer case changes the angle between the driveshaft and the joints at each end. Those angles affect how smoothly power moves through the driveline, and steep or mismatched angles can cause vibration at speed. After installing an adapter, check that the driveline sits at a workable angle and that nothing binds through full suspension travel.
The universal joints carry the load through every angle change, so inspect them when the adapter goes in. Look for play in the caps, dry bearings, and rust streaks at the seals. Replacing worn joints at the same time avoids pulling the driveline apart twice. A driveline that was balanced before may need a fresh check if the yoke and joint angles change.
- Check U-joint caps for play
- Look for rust or leaking seals
- Recheck driveline angles after any suspension change
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 100116-3-KIT |
| UPC | 70000621219 |
| Shaft patterns | 1986–89 and 1990–95 Samurai |
| Connects to | Toyota axle or transfer case |
Vehicle fitment
It fits 1986–1995 Suzuki Samurai models in Base, JA, JL, JS, JX and JX SE trims.
The adapter covers only the Suzuki side. Choose the Toyota axle or transfer case to pair with it, and confirm the bolt pattern before installing. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is sold as part number 100116-3-KIT. Check the package contents against your installation before starting.









