Overview
The Crown Automotive 5252507 is an inner pinion bearing set for the Dana Model 35 rear axle. It includes a bearing and a cup and fits the inner pinion position.
It fits the 1984–2001 Jeep Cherokee (XJ), 1986–1992 Comanche, 1999–2004 Grand Cherokee (WJ), 1993–1998 Grand Cherokee (ZJ), 2002 Liberty (KJ), 1997–2006 Wrangler (TJ) and 1987–1995 Wrangler (YJ).
Key features
- Bearing and cup in one set
- Made for the Dana Model 35 rear axle
- Inner pinion position
Pinion bearing basics
The pinion bearings support the pinion shaft that drives the ring gear, so they carry steady load and need a precise fit. An inner bearing sits closer to the differential, while an outer bearing is nearer the yoke. Replacing one bearing often means checking the other, the pinion seal and the bearing preload together.
Rough turning, play in the pinion or a whine that changes with load can point to a worn bearing. Before fitting a new set, inspect the gear teeth for pitting and confirm the bearing cup seats fully. Clean the housing bore, because dirt left behind shortens bearing life quickly.
- Feel for rough or notchy rotation of the pinion
- Check the pinion seal for leaks
- Keep bearings clean and dry until installed
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5252507 |
| UPC | 848399075076 |
| Axle | Dana Model 35 |
| Position | Inner |
| Set contents | Bearing and cup |
Vehicle fitment
It fits Jeep Cherokee (XJ) 1984–2001, Comanche 1986–1992, Grand Cherokee (WJ) 1999–2004, Grand Cherokee (ZJ) 1993–1998, Liberty (KJ) 2002, Wrangler (TJ) 1997–2006 and Wrangler (YJ) 1987–1995.
The list does not include the Wrangler (JK) or the Wrangler (LJ).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pinion bearing preload is set during gear setup, so a professional should install and set this bearing set.
What’s included
One bearing and one cup.









