Overview
The Dana Spicer Dana 60 locking ring, part number 621028, is a spindle nut locking ring for Dana 60 front axles. It serves one side only and fits Dana 50, Dana 60 and Dana 61 front axle types.
Its inside diameter is 2.002, outside diameter 2.845 and thickness 0.120. Confirm vehicle models and years against your axle before ordering.
Key features
- Services one side only
- Front axle location
- Axle types shown as Dana 50, Dana 60 and Dana 61
- Listed inside diameter, outside diameter and thickness
Checking the spindle nut area
The locking ring sits under the spindle nut and keeps it from backing off as the hub turns. When it is seated correctly, the nut stays put under load and the bearing keeps the correct preload. A ring that is cracked, bent or loose can let the nut creep, which can lead to hub noise or wheel bearing damage if left alone.
Inspection is quick. Check the tabs for cracks, look for distortion where the ring meets the spindle, and confirm the nut threads are clean and undamaged. Fit the ring with its tabs aligned to the nut, and recheck the nut position after the first few drives so you know the setup has settled.
- Look for cracks and bent tabs
- Check spindle nut threads for damage
- Recheck nut position after early drives
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 621028 |
| UPC | 23913147433 |
| Axle location | Front |
| Axle types | Dana 50, Dana 60, Dana 61 |
| Inside diameter | 2.002 |
| Outside diameter | 2.845 |
| Thickness | 0.120 |
| Service | One side only |
Vehicle fitment
Our fitment list has no vehicles for this locking ring. Dana Spicer shows a Universal Fit label across Dana 50, Dana 60 and Dana 61 front axles, with no model years given.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item is the locking ring only. Check that the spindle nut, inner nut and hub parts are on hand before starting.









