Overview
The Warn manual hub spindle nut kit, part number 32720, is a front hub spindle nut kit for Dana 35, Dana 44 and GM 10 Bolt 8.5 Inches axles. Warn marks the kit as universal fit across those axle types, so the axle type matters more than a vehicle model.
Manual hub maintenance
A manual hub lets the driver disengage the front axle for two-wheel drive use, which reduces drivetrain wear and drag on the road. Keeping the hub working properly depends on clean lubrication, correct bearing preload and a spindle nut that is set to the right tension for the axle.
Routine checks are simple. Look for grease leaking past the hub, listen for grinding or rumbling as the wheel turns, and rock the wheel to feel for play. Any of these signs calls for inspection of the bearings and spindle nut before the hub is used off-road. Keep the dial and seals clean, since grit inside the hub is a common cause of early wear.
- Look for grease leaking past the hub
- Listen for grinding or rumbling at the wheel
- Check for play by rocking the wheel
Specifications
| Brand | Warn |
|---|---|
| Part number | 32720 |
| UPC | 12748327202 |
| Hub type | Manual |
| Position | Front |
| Axle types | Dana 35, Dana 44, GM 10 Bolt 8.5 Inches |
| Spline counts | 19 spline and 27 spline |
Vehicle fitment
Warn lists axle types rather than vehicles: Dana 35, Dana 44 and GM 10 Bolt 8.5 Inches, all at the front. No vehicle years, makes or models are given. Check your axle type and spline count against the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the spline count to your axle before installing, since the kit is listed with both 19 spline and 27 spline.









