Overview
The Dana Spicer 707469X is a set of replacement front ball joints for Dana 60 axles, fitting 1994-1999 Dodge Dana 60 applications. Each set is sold in pairs, with one upper and one lower ball joint.
Dana Spicer presents them as factory-matched replacements, with a service life it describes as 100,000 miles plus in many applications. They are not lubeable.
Key features
- Replacement front ball joints for Dana 60 axles
- Sold in pairs, one upper and one lower joint
- Not lubeable design
- Designed to match the factory ball joints.
Choosing and fitting pairs
Ball joints in a Dana 60 front end carry steering and suspension loads at the knuckle. Wear often shows up as a clunk over bumps, steering wander, or uneven tire wear across the tread. Because the upper and lower joints wear together over time, a pair is usually replaced at the same visit, even if only one joint looks worn.
When fitting, pay attention to torque on the stud nuts and cotter pins, and make sure the new joints seat squarely in the knuckle. Clean the mating surfaces and check the steering arms and tie rod ends while the knuckle is apart. Dust boots should be intact before assembly. Plan for a front-end alignment afterward, since changing joints alters the wheel geometry slightly.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 707469X |
| UPC | 23913148980 |
| Axle location | Front |
| Axle type | Dana 60 |
| Included | 1 upper ball joint, 1 lower ball joint |
| Sold as | Pairs |
| Lubeable | Not lubeable |
| Listed application | 1994-1999 Dodge Dana 60 |
Vehicle fitment
No vehicle-by-vehicle fitment list is available. The listed application is 1994-1999 Dodge Dana 60, which names an axle and no specific model or trim. Dana Spicer labels the joints universal fit, but the Dana 60 axle type is what determines suitability.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing these joints means working on the steering knuckle, so have the front axle inspected and aligned afterward.
What’s included
Sold as one pair, with 1 upper ball joint and 1 lower ball joint included.









