Select your vehicle
-13%

Moog Front Lower Ball Joint – K80997

Moog

$40.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front lower ball joint, bolt-on type, part MOGK80997
  • Fits Chevrolet Colorado and GMC Canyon, 2004–2012
  • Also fits Honda Passport and Isuzu i-series trucks
  • Greasable with a hardened ball stud

Description

Overview

The Moog K80997 is a bolt-on front lower ball joint, part number MOGK80997. It fits the 2004–2012 Chevrolet Colorado and GMC Canyon, the 1994–2002 Honda Passport, and the 2006 and 2007–2008 Isuzu i-280, i-290, i-350 and i-370 models.

Unlike the press-in joints in this range, this one bolts to the knuckle, which makes it a direct swap for a worn lower joint on the models named. It has a hardened ball stud, a greasable socket and a forged housing with a larger grease reservoir.

Key features

  • Bolt-on type that mounts to the knuckle with fasteners
  • Greasable socket, which Moog says lets new lubricant flush contaminants away
  • Hardened ball stud for higher loads
  • Dust boot with an encapsulated Belleville washer
  • Forged housing with up to 52% more material in key areas
  • Pre-tapped grease fitting hole and a larger grease reservoir

Bolt-on installation tips

Bolt-on lower joints mount to the knuckle with fasteners, so the job is mostly about removing the old fasteners cleanly and seating the new joint without forcing it. Clean mating surfaces help the joint sit flat, and threads should be checked and cleaned before new fasteners go in. Use a torque wrench set to the value for your vehicle rather than guessing by feel, and replace any fastener that shows stretching or damage.

Because the joint pivots under steering and braking load, a loose or dry socket shows up quickly as clunking or wandering. Greasing through the fitting after installation keeps the socket working freely, and a split dust boot is a sign to inspect the joint before the grease runs out. An alignment is the usual follow-up after any lower joint change, and a low-speed road test confirms that nothing binds.

Specifications

Brand Moog
Part number MOGK80997
Position Front lower
Joint type Bolt-on
Lubeable Yes
Housing Forged, with up to 52% more material in key areas

Vehicle fitment

It fits the 2004–2012 Chevrolet Colorado (Base, LS, LT, Sport, WT and Z71 versions among others), the 2004–2012 GMC Canyon, the 1994–2002 Honda Passport, the 2006 Isuzu i-280 and i-350, and the 2007–2008 Isuzu i-290 and i-370.

Chevrolet and GMC pickups and SUVs outside the Colorado and Canyon names are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because this joint is bolt-on, the work is a matter of removing the old fasteners and mounting the new joint to the knuckle, not pressing it in.

What’s included

One Moog front lower ball joint, part MOGK80997.

Fitment

VehicleYearsTrims
Chevrolet Colorado2004–2012Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS
GMC Canyon2004–2012SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE
Honda Passport1994–2002DX, EX, LX
Isuzu i-2802006Base
Isuzu i-2902007–2008LS, S
Isuzu i-3502006Base
Isuzu i-3702007–2008LS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the K80997 a bolt-on joint?

Yes. It is a bolt-on type, so it mounts to the knuckle with fasteners and does not need to be pressed in. It is also greasable.

Does the K80997 fit a 2011 GMC Canyon?

Yes. The GMC Canyon fits 2004 through 2012 models, so a 2011 model year is covered. Z71 and SLE versions are among the covered trims. Confirm fit for your vehicle's year, model and trim before ordering.

Which Isuzu models does the K80997 fit?

The i-280 and i-350 fit 2006 models, and the i-290 and i-370 fit 2007 to 2008 models. These entries cover base, LS and S versions, so confirm the trim on your truck before ordering.

Does a bolt-on ball joint need a press?

No. Bolt-on joints mount with fasteners, so the old joint is unbolted and the new one is seated on the knuckle. A standard set of hand tools and a torque wrench covers most jobs, though the exact steps depend on the vehicle.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon