Overview
The Dana Spicer Dana 44/GM 10 Bolt Spindle Studs, part 36326-2, are hard-to-find spindle studs for Dana 44 and GM 10 bolt knuckles. The product bullets list 1969 to 1980 GM Dana 44, 1981 to 1991 GM 10 bolt and 1968 to 1975 Ford open knuckle drum brake Dana 44 applications.
The studs are sized to fit the application without damaging the knuckle. Welding ordinary bolts onto a knuckle is not a safe substitute for these studs.
Key features
- Spindle studs for Dana 44 and GM 10 bolt knuckles
- Sized to fit the application
- Hard-to-find replacement part
Before you buy
Spindle studs thread into the steering knuckle and carry the wheel bearing and hub assembly, so they take real load every time the truck turns or brakes. Over time the threads can strip or the stud can loosen in its bore, and a loose stud shows up as a wobble, a clicking noise, or a hub that will not stay tight. Inspect the bores for cracks and the threads for damage whenever the hub is off.
When choosing replacement studs, match the knuckle style and axle generation first, since the stud head and length must seat correctly. Replacing one stud usually means checking the rest, because they wear together. Most rebuilds also renew the hub, bearing and seal, so plan those parts at the same time. Use a torque wrench to the value in your service manual and recheck after the first few drives.
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 36326-2 |
| UPC | 23913139094 |
| Applications listed | 1969 to 1980 GM Dana 44; 1981 to 1991 GM 10 bolt; 1968 to 1975 Ford open knuckle drum brake Dana 44 |
Vehicle fitment
Fitment is listed by application year and axle, not by a named vehicle. Check the year, knuckle type and axle against your truck before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Spindle studs, part 36326-2. Check the package contents against your installation before starting.









