Overview
The Dana Spicer 73624-2X is a driver side rear axle shaft for Dana 35 axles, fitting 1990-2000 Jeep YJ, XJ and TJ models built without ABS. Axle shafts carry power from the differential to the rear wheel, so this replacement suits owners who need a driver side Dana 35 shaft with a 27 spline end.
It measures 30.54in overall and uses a 5 on 4.5in bolt pattern with C-clip style retention. Match the side and ABS setup of your Jeep before ordering.
Key features
- Driver side rear position on Dana 35 axles
- C-clip style retention
- 5 on 4.5in bolt pattern
- Non-ABS application
Rear shaft wear and seals
A rear axle shaft transfers torque from the differential to the rear wheel, so it is exposed to twisting loads and shock during off-road use. Worn shafts often show up as clunking when accelerating or decelerating, vibration under power, or a wheel that feels loose at the hub. Inspect the splines and the retaining hardware each time the axle is opened.
Shaft replacement is a good time to check the rear axle seal, bearing and brake parts. A leaking seal can contaminate brake linings and wheel bearings, and a worn bearing can wear a new shaft early. Keep the old gasket surfaces clean and use fresh sealant or gasket material as the job requires.
- Check the axle seal for leaks
- Inspect bearing play at the hub
- Clean the housing before reassembly
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 73624-2X |
| UPC | 23913133801 |
| Axle type | Dana 35 |
| Axle location | Rear |
| Shaft location | Driver side |
| Overall length | 30.54in |
| Spline size | 1.18in, 27 spline |
| Bolt pattern | 5 on 4.5in |
| Retention | C-clip style |
| ABS | Without ABS |
| Popular axle manufacturer | Dana |
Vehicle fitment
It fits 1990-2000 Jeep YJ, XJ and TJ models built without ABS: Wrangler (YJ) 1990-1995, Cherokee (XJ) 1990-2000 and Wrangler (TJ) 1997-2000.
It does not cover Wrangler LJ or JK generations, Grand Cherokee ZJ or WJ models, or ABS-equipped axles. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the driver side rear axle shaft is described. No hardware, seals or bearings are named.








