Select your vehicle

Currie Parking Brake Cable Kit – CE-6020JK

Currie

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2007–2017 Jeep Wrangler, Rubicon and Unlimited, 2-door and 4-door
  • Uses Jeep JK brakes on any axle
  • Lokar universal cables with Currie bracketry; welding required

Description

Overview

The Currie CE-6020JK is a parking brake cable kit for the 2007–2017 Jeep Wrangler, for 2-door and 4-door models, that works with Jeep JK disc brakes on any axle. It pairs Lokar universal disc brake parking brake cables with mounting hardware made by Currie.

The kit connects the factory single cable from the cab to the parking brakes on a rearend fitted with Jeep JK disc brakes. It is generally used on vehicles other than JKs when JK brakes are installed. Welding is required.

Key features

  • Parking brake cable kit for Jeep JK disc brakes
  • Lokar universal cables with Currie hardware
  • Works with JK brakes on any axle
  • Includes a universal-length cable and outer sheath
  • Weld-on tabs mount the cables to the axle tube
  • Fits 2-door and 4-door models

Parking brake cable care

A parking brake cable works by pulling on the rear brake mechanism through a sheathed cable, so friction and corrosion are the main wear points. Check the cable sheath for cracks or rust, and make sure the cable moves freely through its full travel. A cable that sticks can leave the brake partly applied or fail to hold the vehicle on a slope.

When a rear brake job is done, the cable routing and the equalizer position should be checked together. Keep the cable clear of the exhaust and moving suspension parts, and adjust the tension so both rear brakes engage evenly.

  • Inspect the sheath for cracks and rust
  • Confirm free movement through full travel
  • Check cable routing away from heat sources
  • Test the brake hold on a slope after adjusting

Specifications

Brand Currie
Part number CE-6020JK
Part type Parking brake cable kit
Cable Lokar universal disc brake parking brake cable
Brakes supported Jeep JK disc brakes
Mounting Weld-on tabs, welding required
Body styles 2-door and 4-door
Fit type Direct fit

Vehicle fitment

The CE-6020JK fits the 2007–2017 Jeep Wrangler, including the Rubicon and Unlimited models from 2007 to 2017.

The kit is built around JK disc brakes, so it does not cover Wranglers outside 2007–2017 or other brake types. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Welding is required. The kit includes weld-on tabs that mount the back end of the cables to the rearend’s axle tube, and the cable ties in at the junction point with the factory single cable.

What’s included

Universal-length cable, universal-length cable outer sheath, all hardware to attach the cables at the junction point with the factory single cable, and weld-on tabs for mounting the cables to the axle tube.

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201770th Anniversary (2-Door), 75th Anniversary (2-Door), Rubicon (2-Door), Sahara (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 70th Anniversary (4-Door), Unlimited 75th Anniversary (4-Door), Unlimited Rubicon (4-Door), Unlimited Sahara (4-Door), Unlimited Sport (4-Door), Unlimited Sport S (4-Door), Unlimited X (4-Door), X (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What does the Currie CE-6020JK parking brake kit fit?

It fits the 2007–2017 Jeep Wrangler, Rubicon and Unlimited, in 2-door and 4-door models. It is also used on other vehicles that run JK brakes.

Does the CE-6020JK require welding?

Yes. Welding is required to attach the supplied tabs to the axle tube, which mount the rear end of the cables on the rearend.

What is included in the Currie CE-6020JK?

The kit includes a universal-length cable, a universal-length outer sheath, hardware to connect to the factory single cable at the junction point, and weld-on tabs.

Can the CE-6020JK be used on a non-JK axle?

Yes. The kit works with JK brakes on any axle and is generally used on vehicles other than JKs when JK brakes are installed.

How often should a parking brake cable be inspected?

Inspect it during regular brake service and whenever the parking brake feels loose or does not hold. Look for rust, a stiff pull or a frayed sheath. Cables that are corroded or stuck should be replaced so the brake can be applied evenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon