Overview
The Currie CE-9106 is a pair of adjustable-length Johnny Joint lower control arms for the Jeep Wrangler (TJ and LJ), Cherokee (XJ) and Comanche (MJ). The arms can be used front or rear on TJ and LJ models, and on the front of XJ and MJ models.
Each arm has a Johnny Joint on both ends and is made from 1 1/4 in. heavy wall D.O.M. tubing. It fits the Cherokee (XJ) from 1984 to 2001, the Comanche from 1986 to 1992, the Wrangler (LJ) from 2004 to 2006 and the Wrangler (TJ) from 1997 to 2006.
Key features
- Johnny Joint rod ends on both ends of each arm
- Adjustable length to set pinion angle after a lift
- Heavy steel construction with 1 1/4 in. heavy wall D.O.M. tubing
- Gold powdercoat finish
Pinion angle and lift height
Adjustable lower control arms let the axle sit at the right angle after a lift, which keeps the driveshaft working within its limits and reduces vibration. Length changes affect both the pinion angle and the axle’s position, so adjust the arms in small steps and check the angles after each change. Johnny Joint ends handle the movement of a flexing axle.
Heavy wall tubing gives the arms strength under load, but the rod ends and threads still need attention. Inspect the joints for play, torn boots and worn threads at regular intervals. When the arms are reset, confirm the axle is square in the frame and that the driveline is free of binding before driving on the road. Lock the adjusters and jam nuts once the length is set, and recheck the setting after the first few trail runs.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9106 |
| UPC | 70000164500 |
| Position | Front lower |
| Rod ends | Johnny Joint on both ends |
| Length | Adjustable |
| Construction | Heavy steel, 1 1/4 in. heavy wall D.O.M. tubing |
| Finish | Gold powdercoat |
| Quantity | Sold as a pair |
Vehicle fitment
Currie lists these arms for the 1984–2001 Jeep Cherokee (XJ), the 1986–1992 Jeep Comanche, the 2004–2006 Jeep Wrangler (LJ) and the 1997–2006 Jeep Wrangler (TJ) in several trims.
It does not fit the Wrangler (JK), the Liberty (KJ) or the Grand Cherokee (ZJ or WJ). Confirm the year, model and trim match your vehicle before ordering.
Installation notes
Set the pinion angle by adjusting the length once the lift is installed, then check the driveline angles. Front use is the setting for XJ and Comanche models.
What’s included
The arms are sold as a pair. Confirm bushings and other hardware against your installation before starting.












