Overview
The ARB Adjustable Front Upper Control Arms, part number UCAJKFR, are front upper control arms for the Jeep Wrangler JK. The arms are adjustable so owners can change caster and pinion angles to fine tune ride and handling for both on-road and off-road driving.
The arms are built from 1.25 in x 0.188 in wall (31.7 mm x 4.7 mm) 1020 DOM steel tube with a forged rod end and a stamped steel clevis. They are shot peened, zinc electroplated and powder coated for corrosion resistance. They are sold as a pair.
It fits 2007 to 2018 Jeep Wrangler JK models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
Key features
- Adjustable length with a jam nut for caster and pinion setting
- 1.25 in x 0.188 in (31.7 mm x 4.7 mm) 1020 DOM steel tube
- Stamped steel clevis and forged rod end
- Max C dual Duro bushing
- Precision robotic welding
- Shot peened, zinc electroplated and powder coated finish
- Sold as a pair
Setting caster and pinion
Adjustable upper control arms let you change caster and pinion angles, which affects how the front end tracks and how the driveline loads the axle. Changing those angles also changes alignment, so plan on a full alignment after any adjustment. Before setting the arms, inspect the ball joints, bushings and the rest of the front suspension, since worn joints make the adjustment unreliable.
Use the adjuster to make small changes and record the jam nut position before and after each step. Support the vehicle on stands and recheck torque once the arms are at their final setting. Pay attention to how the vehicle drives after the work, and recheck the setting if steering feels off or tire wear changes.
- Inspect joints and bushings before adjusting
- Record the jam nut position before changes
- Make small adjustments and check each one
- Schedule an alignment after the work
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | UCAJKFR |
| UPC | 9332018040114 |
| Position | Front upper |
| Fitment type | Direct fit |
| Tube size | 1.25 in x 0.188 in wall (31.7 mm x 4.7 mm) |
| Tube material | 1020 DOM steel |
| Clevis | Stamped steel |
| End | Forged rod end |
| Bushing | Max C dual Duro |
| Finish | Shot peened, zinc electroplated, powder coated |
| Quantity | Sold as a pair |
Vehicle fitment
The manufacturer fitment list names the 2007 to 2018 Jeep Wrangler (JK) with these trims: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X, plus the Unlimited versions of the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X.
The 2018 to 2022 Wrangler JL and the Gladiator JT are not covered by this list, and neither are earlier TJ or LJ Wranglers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing caster and pinion angles also changes alignment and driveline angles, so have the vehicle aligned after the arms are set. Support the vehicle securely on stands while you work on the front suspension.
What’s included
A pair of adjustable front upper control arms.
Not included: the lower control arms, which are not part of this pair.





