Overview
The Currie CE-9103S is a double adjustable rear upper control arm with threaded Johnny Joint rod ends. It fits the 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ), and the arms let the pinion angle be set after a lift is installed.
The arms are D.O.M. tubing with a semi-gloss black powdercoat finish. Tubing is either 1 inch x .156 inch wall or 1 1/4in. heavy wall, so measure the arm you receive before installing it. Johnny Joints are fitted on both ends of each arm.
Key features
- Double adjustable design for pinion angle correction after a lift
- Threaded Johnny Joint rod ends on each end
- D.O.M. tubing, 1 inch x .156 inch wall per the feature list
- Semi-gloss black powdercoat finish
- It is a rear upper arm and a direct fit.
Pinion angle after a lift
Double adjustable rear upper arms let the pinion angle be set after the vehicle has been lifted, which helps reduce driveline vibration caused by a changed axle position. The threaded rod ends allow length to be set so the axle stays centered between the tires. Set the length in small steps and check the driveline angle after each change.
Because lift and arm changes affect the whole rear suspension, consider the lower arms, track bar and brake lines during the same job. Tighten the jam nuts once the setting is final, and inspect the rod ends regularly for play or damage. Work under a raised vehicle only on properly rated jack stands, and recheck the arm length after the first off-road trip.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-9103S |
| UPC | 70000662394 |
| Position | Rear upper |
| Adjustment | Double adjustable |
| Rod ends | Threaded Johnny Joint on each end |
| Tubing | 1 inch x .156 inch wall D.O.M. (feature list); 1 1/4in. heavy wall D.O.M. (description) |
| Finish | Semi-gloss black powdercoat |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ), including the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
It is designed for the 1997–2006 TJ and 2004–2006 LJ Wranglers. Confirm fit for the 2007–2018 Wrangler (JK) and later before ordering.
Installation notes
Because these arms adjust pinion angle, check driveline angles and alignment once the lift is installed. Work under a raised vehicle only on properly rated jack stands.
What’s included
Check the hardware and parts you need for installation against your vehicle before starting.









