Overview
The Omix-Ada 16517.01 is an outer pinion bearing and cup kit for Dana 44 axles with tapered axles. It is a direct fit for that axle type.
It fits the 1972-1983 CJ5, the 1972-1975 CJ6, the 1976-1986 CJ7, the 1981-1985 Scrambler, the 1986-1993 Cherokee (XJ), the 1993-1998 Grand Cherokee (ZJ), the 1988-1995 Wrangler (YJ), the 1997-2006 Wrangler (TJ), the 2004-2006 Wrangler (LJ) and the 2007-2010 Wrangler (JK).
Key features
- Outer pinion position
- Bearing and cup supplied together in one kit
- Tapered axle application
- Direct fit, Omix-Ada part number 16517.01
Bearing seating and preload
The outer pinion bearing sits on the pinion shaft and runs against the cup in the carrier. Both faces need to be clean and free of scoring before the new kit goes in, because a rough cup or dirty bearing surface can cause early noise. The cup is driven squarely into the bore, and the bearing should slide onto the shaft without force.
The outer bearing is set together with the inner bearing and the crush sleeve or shim pack, so preload is a system reading rather than one part’s job. Expect to recheck the rolling feel after the pinion nut is tightened. Bearing wear often shows as a growl or play at the pinion, and a worn inner bearing should be considered when the outer is replaced.
- Clean the bore and cup seat before driving the cup
- Check the bearing for roughness when turned
- Recheck preload after the pinion nut is tightened
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 16517.01 |
| UPC | 804314040673 |
| Position | Outer |
| Axle | Dana 44 with tapered axles |
| Included | Pinion bearing and cup |
| Fitment type | Direct fit |
Vehicle fitment
It fits the Jeep CJ5, CJ6 and CJ7, the Scrambler, the Cherokee XJ, the Grand Cherokee ZJ, the Wrangler YJ, TJ and LJ, and the Wrangler JK.
The JK entry runs only through 2010, and the TJ entry runs 1997-2006. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Seat the outer bearing and cup with a driver, and set pinion preload when the pinion is reassembled.
What’s included
One outer pinion bearing and one cup, as a kit.









