Overview
The Rough Country 74201 is a front upper control arm for the 2005–2020 Toyota Tacoma. It is a tube-type arm built as a one-piece fabricated steel design, which Rough Country says is its most durable upper control arm to date.
The one-piece fabricated body avoids the welded joints found in some arm designs. The arm uses Clevite OE style rubber bushings, along with POM ball joints that have a low-friction race and a larger ball diameter for more range of motion and wheel articulation than standard replacement joints.
Key features
- One-piece fabricated steel construction
- POM ball joints with a low coefficient of friction race
- Larger ball diameter for range of motion
- Fully greaseable ball joints with a maintenance free design
- Clevite OE style rubber bushings
Fabricated arms on the trail
A front upper control arm carries the top of the wheel’s ball joint and holds the wheel in its correct position as the suspension moves. Tube-style arms depend on the strength of the body and on where the joints mount. Fabricated bodies are a common choice for trucks that see rocks, ruts and repeated articulation.
The ball joint and bushings are the parts most likely to wear. Greaseable joints should be serviced at the interval the joint requires, while sealed joints need regular inspection for play. Check the arm’s mounting bolts after the first few trail runs and re-torque them as needed.
- Look for torn boots or grease leaking from the joint
- Feel for play at the ball joint with the wheel off the ground
- Check bushings for cracks or separation
- Recheck caster and alignment after any change
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C74201 |
| Position | Front upper |
| Type | Tube |
| Construction | Fabricated steel, one piece |
| Joint design | POM ball joint, fully greaseable |
| Bushings | Clevite OE style rubber |
Vehicle fitment
It fits the 2005–2020 Toyota Tacoma across its base, limited, PreRunner, SR, SR5, TRD Off-Road and TRD Sport models.
Confirm fit for your vehicle’s year, model and trim before ordering, including for the Toyota Tundra, the 4Runner, and any Jeep or GM truck.
Installation notes
Upper control arms set caster and pinion angle, so have the front alignment checked after the arm is installed.
What’s included
One front upper control arm with POM ball joints and Clevite OE style bushings.









