Select your vehicle

Bilstein 5100 Series Shock Absorber – 24-282659

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear ride height adjustable shock for 2002–2007 and 2008–2012 Jeep Liberty
  • Rear lifted height of 0 to 1 in
  • Monotube design with a digressive piston
  • Direct fit for the rear position

Description

Overview

The Bilstein 5100 Series 24-282659 is a rear shock absorber for the 2002–2007 Jeep Liberty (KJ) and the 2008–2012 Jeep Liberty (KK). It is a direct-fit replacement for the rear shock on a lifted Liberty, with a rear lifted height of 0 to 1 inch.

The shock is a monotube design, which keeps the damping oil separate from the gas charge so damping stays steady as the oil heats. It uses a digressive piston that responds to changing road conditions. Each 5100 unit is tuned for its application, which gives a smoother ride, handling and comfort.

Key features

  • Rear lifted height of 0 to 1 in
  • Monotube design with consistent damping
  • Digressive piston that responds to changing road conditions
  • Tuned for the specific application

Rear shock upgrade notes

Rear shocks on a Liberty do more work than their size suggests, because the rear axle moves through a wide range on uneven trails and cargo changes the load. A monotube design keeps the damping consistent when the oil is working hard, which matters on long grades or repeated bumps. Choosing a shock is a matter of matching it to how the vehicle is driven.

Rear shocks wear gradually, so the change in ride is easy to miss. Look for oil on the body, a bent eye or a loose mount, and bushings that have cracked. Replacing the rear shocks as a pair helps the vehicle track straight and keeps the body level under load.

  • Check the shock eyes and bushings for wear
  • Look for oil on the body after the first drives
  • Re-torque the mounting hardware after the first few trips

Specifications

Brand Bilstein
Part number 24-282659
Shock series 5100 Series
Position Rear
Rear lifted height 0 to 1 in
Fitment type Direct fit

Vehicle fitment

It fits the 2002 through 2007 Jeep Liberty (KJ) and the 2008 through 2012 Jeep Liberty (KK). Together the two ranges cover the Liberty across its KJ and KK model years.

Liberty models from before 2002 or after 2012, and the Jeep Cherokee and Grand Cherokee, are not on this list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock absorber.

Fitment

VehicleYearsTrims
Jeep Liberty (KJ)2002–200765th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport
Jeep Liberty (KK)2008–2012Jet, Limited, Renegade, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Bilstein 24-282659 fit a 2005 Jeep Liberty?

Yes. It fits the 2002 to 2007 Jeep Liberty (KJ), so a 2005 model is covered. Confirm the rear position and the lift you need before ordering.

How much rear lift does this shock give?

The rear lifted height is 0 to 1 inch. The amount gained depends on the application and on the rest of the rear suspension, so confirm the result after installation.

Is this a front or rear shock?

It is a rear shock, as its listed position shows. Do not fit it to the front of the Liberty.

Do rear shocks need replacing when the springs are replaced?

Often, yes. Shock damping is matched to spring rate, so new springs can make old shocks feel mismatched or bouncy. Inspecting the shocks while the springs are out lets you replace worn units at the same time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon