Overview
The Bilstein 47-310957 is a B8 6112 front leveling kit with a 2.5-inch front lift for the 2005–2021 Nissan Frontier, the 2005–2015 Nissan Xterra and the 2009–2012 Suzuki Equator. It uses coilover shocks at the front and a zinc plated finish, and it lifts the front only.
The kit contains two 60mm shock absorbers, two matched cold wound coil springs and two billet aluminum spring seats. The spring seats sit in snap-ring grooves on the shock body, which sets a front lift of 0 to 2.75 inches depending on the application. The 60mm digressive piston provides damping control for on-road and off-road use. The kit gives more ground clearance and room for larger tires while increasing wheel travel. It has no bump stops, and no track bar drop is included. The finish is zinc plated.
Key features
- 2.5-inch front lift in this part number
- Coilover shock design with a 60mm digressive piston
- Zinc plated finish
- Billet aluminum spring seats with snap-ring positioning
- No bump stops included
Setting front height
A coilover leveling kit sets front height through the spring seat position in the snap-ring grooves, so the lift depends on where each seat is locked. Changing the seat position alters spring preload and shock extension, which can change how the front feels under load. Make small changes, then check the ride and the alignment.
Because the rear stays at factory height, the front-to-rear relationship changes after installation. Watch for rake, rubbing at full steering lock and tire contact with the fender liner. Inspect the spring seats, snap rings and coil springs at regular intervals, and check the shock mounts and bushings for wear, particularly after trail use.
- Snap-ring position on both sides
- Front and rear height after installation
- Shock mounts and bushings for wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL47-310957 |
| Series | B8 6112 |
| Front lift | 2.5 inches |
| Rear lift | Not applicable, front lift only |
| Front lift method | Coilover shocks |
| Finish | Zinc plated |
| Track bar drop | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2005–2021 Nissan Frontier, including the Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL and SV trims; the 2005–2015 Nissan Xterra, including the Off-Road, PRO-4X, S, SE and X trims; and the 2009–2012 Suzuki Equator, including the Base, RMZ-4 and Sport trims.
The list does not cover the Frontier from 2004 or 2022 onward, or the Xterra from 2004 or 2016 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The track bar stays at its factory height because no track bar drop is included. Set the front alignment after installation.
What’s included
Two 60mm shock absorbers, two coil springs and two billet aluminum spring seats.








