Overview
The IVD3100 is a 1.75-inch leveling spacer for the 2005–2012 Nissan Frontier in 2WD and 4WD. It bolts onto the top of the factory strut to bring the front closer to level with the rear, and it fits the LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims.
The steel spacer is designed to work within the factory suspension parameters, so it is a leveling kit that does not need extensive modifications. It allows installation of 32-inch tall tires with proper clearance. The factory coil spring and shock stay in place.
Key features
- 1.75 inch front lift height
- Quality steel construction
- Bolts onto the top of the factory strut for a simple install
- Allows installation of 32 inch tall tires with proper clearance
- Made in the USA with a lifetime warranty for as long as the owner keeps the vehicle
- Factory spring and shock stay in place
- Fits 2WD and 4WD Frontier trucks
Choosing a leveling spacer
A strut-top spacer raises the front of the truck by changing where the factory coil spring sits. Because the spring and shock stay in use, the ride stays close to stock while the stance moves toward level. Leveling is most useful when the rear sits higher than the front, which is common on trucks that carry a bumper, a winch or a heavier spare tire.
Before buying, measure the current front and rear heights and decide what tire size you plan to run. Taller tires add height on top of the spacer, so the total change at the wheel can be more than the spacer alone. Check brake lines, sway bar links and CV angles after the install, since the front geometry has changed.
- Measure front and rear height before ordering
- Plan the front tire diameter before choosing a spacer
- Inspect sway bar links and brake lines after the install
- Schedule the alignment as part of the job
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICOIVD3100 |
| Front lift height | 1.75 inch |
| Lift method | Coil spring spacer on the factory strut |
| Material | Steel |
| Tire clearance | 32 inch tall tires with proper clearance |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2005–2012 Nissan Frontier in the LE, Nismo Off-Road, PRO-4X, S, SE, SL, SV and XE trims, in 2WD and 4WD.
The 2013 and later Frontier and the Nissan Xterra are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front end alignment is required after installation. The spacer sits on top of the factory strut, so the install is simple and quick. Because the front height changes, the steering geometry should be set again once the spacer is fitted.


