Overview
The Bilstein 33-187112 is a 5125 Series gas pressure monotube shock absorber designed for lifted pickups, SUVs and Jeeps. It uses a 46mm digressive piston with self-adjusting deflective disc valving.
The body is zinc-plated steel with a Triple-C-Technology coating. It suits heavy hauling or occasional off-road use while keeping a comfortable street ride.
Key features
- 46mm digressive piston
- Self-adjusting deflective disc valving
- Gas pressure monotube design
- Zinc-plated steel body
- Triple-C-Technology coating
- Suited to heavy hauling and occasional off-road use
Heavy hauling and trail use
Shocks for heavy hauling face higher loads and more heat than a daily driver. Under a loaded bed or trailer tongue weight, the damper works harder during each compression stroke, so the valving and seal quality matter as much as the spring rate. A unit tuned for both comfort and control keeps the truck stable without making the ride harsh.
Off-road use adds repeated impacts from rocks, ruts and washboard roads. Check that the shock body and mounting eyes are free of dents, since a bent body can bind the piston and reduce damping. Keep the rod clean, because grit on the chrome can tear the seal over time.
- Check the boot for tears after rough trail use
- Inspect the bushings at each oil change
- Replace shocks in pairs on the same axle
- Recheck mounting fasteners after the first off-road outing
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-187112 |
| UPC | 651860614250 |
| Shock series | 5125 Series |
| Piston | 46mm digressive |
| Valving | Self-adjusting deflective disc |
| Body | Zinc-plated steel |
| Coating | Triple-C-Technology |
| Gas charge | Gas charged |
| Universal Fit | Universal Fit |
Vehicle fitment
Lifted pickups, SUVs and Jeeps are named as applications, but no year, model or trim is given. Compare the part with your vehicle’s specifications and confirm the match before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only a single shock absorber is described, with no mounts or hardware named.









