Overview
The Bilstein 4600 Series Shock Absorber, part number 33-188218, is a heavy duty rear shock with a 46mm gas charged monotube body. It is Direct Fit for Ford Bronco, F-150, F-250 HD and F-350 models from 1980 to 1997, with a lift height of w/0 in. Lift/Drop.
The monotube design moves heat from the oil to the outer surface of the shock body, where it dissipates more efficiently. A dividing piston lets the oil expand as heat builds, helping to prevent aeration (foaming) and viscosity loss so the shock keeps its damping as temperatures rise.
Key features
- Patented gas charged monotube design, which Bilstein says improves heat dissipation
- Dividing piston that manages oil expansion and helps prevent aeration and viscosity loss
- Tube formed by a special extrusion method for tight peak-to-valley tolerance and consistent wall thickness
- Seamless monotube construction that Bilstein describes as strong and long lasting
- Piston head that allows independent tuning of compression and rebound damping
- Fewer parts than most conventional twin tube and road sensing designs
Heat and damping in monotube shocks
Damping in a monotube shock depends on the oil staying free of air and at a steady viscosity. When the shock runs hot, the oil thins and foams if it cannot expand, and the ride becomes inconsistent. A dividing piston and an outer body that sheds heat are designed to keep that under control during long descents or repeated use.
Heat is the main enemy of any shock, so avoid parking immediately after hard use with the body in direct sun or near exhaust parts. On older Fords the springs and bushings are often as worn as the shock, so inspect them together. If the rear feels floaty over bumps, the shock is a likely cause, but check the mounts before deciding.
Replacement is simpler when the old part is photographed and the mounts are measured before removal.
- Let the body cool after hard runs
- Check mounts and bushings with the shock
- Note mount spacing before removal
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-188218 |
| UPC | 651860642130 |
| Shock series | 4600 Series |
| Body | 46mm monotube, heavy duty |
| Hydraulic / gas charged | Gas charged |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift height | w/0 in. Lift/Drop |
| Old part number | F4-B46-1327-H1:Yellow |
Vehicle fitment
Bilstein’s manufacturer fitment list covers 1980–1996 Ford Bronco (Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite, XLT Sport), 1980–1984 Ford F-150 (Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT, XLT Lariat), 1997 Ford F-250 HD (XL, XLT) and 1985–1997 Ford F-350 (Base, Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat).
The list does not include 1985–1996 F-150 models or F-250 HD model years other than 1997, and it has no entries for other Ford models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber, part number 33-188218. Check the package contents, including mounting hardware, against your installation before starting.









