Overview
The Bilstein 24-016179 is a front monotube gas-charged shock absorber from the 4600 Series, with a 2 in body diameter and yellow finish. The manufacturer fitment list places it on the 1987–1998 Ford F-250, the 1997 Ford F-250 HD and the 1986–1997 Ford F-350. Its position is Front, so it is meant for the front suspension of those trucks.
A monotube shock keeps its damping piston and oil in one tube, with a gas charge under pressure. Bilstein explains that its seamless design carries heat from the damping oil through the body and out to the air. The maker also cites a dividing piston that lets the oil grow as it warms, so the shock keeps full damping on hot days or after long runs over rough ground.
Key features
- Front-position shock for the Ford F-250 and F-350 trucks covered here.
- Monotube body with a gas charge, built as a seamless tube.
- Compression and rebound damping that can be tuned independently in the piston design.
- Dividing piston that limits foaming and viscosity loss as the oil heats.
- Boots included with the shock.
- Yellow finish on a 2 in body.
Matching a front shock
Front dampers control how quickly the wheels settle after a dip, a rise or a sharp hit on rough ground. On a four-wheel drive truck with a solid front axle, a worn front shock can let the axle hop and make steering feel vague at speed. Pay attention to how the truck tracks on a washboard road, since that is often the first sign that the front dampers have given up.
Front shocks work alongside the bump stops, springs and steering linkage, so their condition affects the whole front end. Remove the old unit carefully and compare its mounting eyes, stud spacing and overall length with the new one before fitting. Replace worn upper and lower bushings at the same time, and use new fasteners where the old ones have stretched or corroded.
- Upper and lower mount bushings
- Bump stop condition
- Steering play and wander
- Even tire wear across the front axle
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-016179 |
| UPC | 651860402963 |
| Shock series | 4600 Series |
| Type | Monotube, gas charged |
| Body diameter | 2 in |
| Position | Front |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Fitment type | Direct fit |
| Lift/Drop | w/0 in. Lift/Drop |
Vehicle fitment
The manufacturer fitment list includes three entries: the 1987–1998 Ford F-250 with Base, Custom, Eddie Bauer, Lariat, Special, XL, XLT and XLT Lariat trims; the 1997 Ford F-250 HD with XL and XLT trims; and the 1986–1997 Ford F-350 with Base, Custom, Eddie Bauer, Special, XL, XLT and XLT Lariat trims.
Ford models and years outside these entries, including the F-150, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the front position and the 2 in body diameter against the shock you are removing. Gas-charged shocks are pressurized, so store and handle the body with care and never heat it.
What’s included
Boots come with the shock. Check the package contents against your installation before starting, including mounting hardware.









