Overview
Bilstein part number 33-186009 is a 5100 Series rear shock absorber with 12 mm eye mounts at both ends, suited to a 0 – 2 in. lift. No vehicle, model or year is tied to this part, so fit is not confirmed.
The 5100 Series is a gas-pressure monotube design for lifted trucks, Jeeps and prerunners. This non-coilover shock has a 46 mm ID smooth body, a 14 mm shaft, no reservoir and a boot included.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston that reduces harshness
- Independent rebound and compression tuning
- Larger working piston area for damping
- Built for large diameter tires
Choosing for a small lift
Shocks sized for a small lift sit closer to the stock travel range, so the choice between a stock-length and a small-lift part depends on how the suspension is set up. Measure ride height at all four corners before ordering, since uneven height affects damper angle and bushing wear. A monotube gas design keeps damping consistent under repeated compression, which helps when tires are larger than stock.
Large diameter tires add weight and rolling resistance, which puts extra load on shocks and mounts. Inspect the bushings, eyes and brackets for cracks or play, and replace them when they show wear. Look for oil residue on the shaft, dented bodies or a shaft with pitting, which means the shock has lost its seal and should be replaced.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-186009 |
| UPC | 651860490311 |
| Series | 5100 Series |
| Position | Rear |
| Collapsed length | 16.69 in. |
| Extended length | 27.11 in. |
| Travel length | 10.42 in. |
| Lower mount | Eye, 12 mm |
| Upper mount | Eye, 12 mm |
| Shaft diameter | 14 mm |
| Body design | 46 mm ID smooth body (non-coilover) |
| Internal design | Mono tube |
| Reservoir | No |
| Boot included | Yes |
| Gas charged | Yes |
| Finish | Zinc plated |
| Fitment type | Direct fit |
| Lift height | With 0 – 2 in. lift |
Vehicle fitment
No vehicle fit is confirmed for 33-186009. Lifted trucks, Jeeps and prerunners are the general uses for this design.
Without a confirmed model or year, compare the collapsed and extended lengths with your current shock before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both mounts are 12 mm eyes, so measure your existing bushings or bolts before fitting. Keep to the 0 – 2 in. lift range and verify your suspension height first.
What’s included
One shock absorber with a boot included. Check the package contents against your installation before starting.









