Overview
The Bilstein B8 8112 (ZoneControl CR) front corner module is a position sensitive coilover shock for light trucks and SUVs, listed by Bilstein under 41-269282. ZoneControl CR uses a triple piston design with 3 compression zones and 2 rebound zones, so the damping responds to where the suspension sits in its travel. Bilstein gives a front lift height of 0.6 to 2.5 in. for this unit.
This unit is a front corner module. Confirm the corner position, front right or front driver side, against your vehicle before ordering. Each unit includes a 60mm remote reservoir for added oil capacity and cooling, plus a bolt-on anodized reservoir chassis mount. The design aims to give comfort during everyday driving and control over large suspension inputs.
Key features
- ZoneControl CR position sensitive damping with 3 compression zones and 2 rebound zones
- Triple piston design with 3 independent pistons
- 2-stage internal compression stop that reduces the need for an external hydraulic bump stop
- Secondary internal rebound stop that stabilizes the suspension after a large compression event and limits top-out without an external limit strap
- 60mm remote reservoir for increased oil capacity and cooling
- Chrome 5/8 in. heim joint mounting with rubber sealed misalignment spacers
- Aluminum components with zinc plated shock bodies
- Factory rebuildable
Position sensitive damping
Position sensitive dampers change their resistance based on where the suspension sits in its travel, so the response near ride height can differ from the response near full compression. That helps with comfort on smooth roads and control on hard hits. Internal stops reduce the need for external bump stops, but the bump stop area should still be inspected.
Remote reservoirs add oil volume and help the shock run cooler on long or rough trips. Route the reservoir hose clear of heat and rub points, and keep the chassis mount tight. Heim joints wear over time, so check their movement and the rubber spacers regularly.
- Check the chassis mount for tightness
- Inspect heim joint play and seals
- Keep the reservoir hose clear of heat
Specifications
| Brand | Bilstein |
|---|---|
| Model | B8 8112 (ZoneControl CR) |
| Part number | 41-269282 |
| UPC | 651860797991 |
| Position | Front corner module; confirm right or driver side before ordering |
| Front lift height | 0.6 in. to 2.5 in. |
| Reservoir | 60mm remote, anodized chassis mount |
| Mounting | Chrome 5/8 in. heim joint |
| Damping | 3 compression zones, 2 rebound zones, 3 independent pistons |
| Shock series | 8112 Series, coil-over |
| Quantity | 1 per pack |
Vehicle fitment
It is a direct fit coilover kit for light trucks and SUVs. Confirm fit for your truck or SUV’s year, make, model and trim before ordering. Compare the 0.6 to 2.5 in. front lift height with your current setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The remote reservoir uses the bolt-on chassis mount supplied with the unit. The chrome heim joint mounts use rubber sealed misalignment spacers, so check the mount hardware before installing. Measure your current front height against the 0.6 to 2.5 in. range before fitting.
What’s included
One ZoneControl CR corner module with the 60mm remote reservoir and the anodized reservoir chassis mount, quantity 1 per pack.














