Overview
The Bilstein 4600 Series Shock Absorber, part number 24-186230, is a gas charged monotube shock absorber with a 2 in body diameter, a yellow finish, no reservoir and boots included. It is a direct-fit design. Confirm fit for your vehicle’s year, model and trim before ordering.
Bilstein describes its patented monotube gas charged design as a way to move heat from the oil to the outer surface of the shock body, where it dissipates more efficiently. A dividing piston lets the oil expand as heat builds, which Bilstein says prevents aeration (foaming) and viscosity loss, so the shock keeps its full damping characteristics as temperatures rise.
The tube is made with a special extrusion method that gives a tight peak-to-valley tolerance and consistent wall thickness. Bilstein credits the seamless monotube design, its piston head and a digressive design with fewer parts than most conventional twin tube and road sensing shocks for durability and long shock life. Shoppers comparing shock types can review the specifications table below for body diameter, finish and boot details.
Key features
- Patented monotube gas charged design that moves heat from the oil to the outer shock body
- Dividing piston lets the oil expand as heat builds, limiting aeration and viscosity loss
- Tube made by a special extrusion method with tight peak-to-valley tolerance and consistent wall thickness
- Seamless monotube construction that Bilstein says adds tube strength and maximizes heat dissipation
- Piston head allows independent tuning of compression and rebound damping forces
- Digressive piston design with fewer parts than most conventional twin tube and road sensing designs
- Boots included
Why monotube design matters
A monotube gas charged body separates the damping oil from the gas in a single tube, which keeps the oil from foaming when it heats up. Heat has to leave the shock to keep the damping steady, so the outer body is an important part of the design. On a shock that is worked hard, steady damping means more predictable handling on washboard, rocks and fast fire road sections.
Choosing a replacement starts with the mounting style and stroke. A shock that is too long or too short for your suspension can bottom out, or it can run out of travel before the axle does. If the shock is paired with new springs or a lift, check its length against the new ride height. Keep the reservoir-free design in mind too, because a remote reservoir would need its own mounting space.
- Check mounting style before ordering
- Match the length to your current ride height
- Inspect the boot after each season of use
- Replace worn bushings at the same time
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186230 |
| UPC | 651860588933 |
| Series | 4600 Series |
| Internal design | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
Vehicle fitment
The shock is a direct-fit design. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Compare the mounting points against the shock you are replacing.
What’s included
Bilstein 4600 Series gas charged monotube shock absorber with boots.
Not included: The shock has no reservoir, so no remote reservoir is part of this item.









