Overview
The Bilstein 24-022361 is a front 46mm monotube gas charged shock absorber in the 4600 Series. It fits the 1990 Ford Bronco II, the 1990–1997 Ford Ranger and the 1994–1997 Mazda B2300 and B4000, plus the 1994–1996 Mazda B3000. It is a heavy duty direct fit shock in yellow, with a single tube that holds gas pressure.
Heat control is the main job of this shock. The damping oil passes heat through the shock body to the outer surface, where it dissipates. A dividing piston lets the oil expand as it warms, which prevents aeration and foaming and keeps the oil from losing viscosity. The shock therefore keeps its full damping characteristics as temperatures rise.
Key features
- Gas charged monotube body that moves heat from the damping oil to the outer shock surface.
- Dividing piston lets the oil expand as heat builds, reducing foaming and viscosity loss.
- Seamless tube made by a special extrusion method, with tight peak-to-valley tolerance and consistent wall thickness.
- Piston head tunes compression and rebound damping independently for ride comfort and control.
- The design uses fewer parts than conventional twin tube and road sensing shocks.
- Heavy duty construction in a yellow finish, from the 4600 Series.
Front shock on older trucks
Compact pickups and older Ford and Mazda trucks often carry loads over rough ground, so the front shock sees steady work from washboard roads and potholes. A gas charged monotube design is built to shed heat through the body, which helps the damping hold up during long drives. Heavy duty construction suits repeated hard hits on rough ground.
Before choosing a front shock for an older truck, check the upper and lower mounts, the bushings and the bump stop, since worn parts can cause a new shock to feel loose. Many owners replace the pair at once so the steering and ride stay balanced. Look for oil on the body, a clunk over bumps or uneven front tire wear as signs of trouble.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-022361 |
| UPC | 651860643441 |
| Old part number | BILF4-B46-2236-H1 |
| Shock series | 4600 Series |
| Position | Front |
| Size | 46mm monotube |
| Charging | Gas charged |
| Fitment type | Direct fit |
| Lift/drop rating | w/0 in. Lift/Drop |
| Finish | Yellow |
Vehicle fitment
It fits 1990 Ford Bronco II (Eddie Bauer, XL, XL Sport, XLT, XLT Plus); 1990–1997 Ford Ranger (Custom, S, S Plus, STX, Splash, Sport, XL, XL Sport, XLT); 1994–1997 Mazda B2300 (Base, SE); 1994–1996 Mazda B3000 (Base, SE); and 1994–1997 Mazda B4000 (Base, LE, SE).
Other Ford and Mazda models, later Ranger generations and years outside these ranges are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Only the shock absorber is included in this part number. Check the delivered parts against the packaging before fitting, including mounting hardware.









