Overview
The Bilstein 5125 Series 46mm Monotube Shock Absorber, part number 33-230306, is a zinc plated shock with a 9.41 in. collapsed length and a 13.88 in. extended length. It is a universal fit shock, so it is not tied to a specific vehicle.
The 46mm monotube body is the core of this shock. Bilstein’s monotube design uses a single tube with gas pressure, which is intended to keep damping steady as the oil heats. Measure your mount-to-mount distance and compare it with these lengths before installing.
Key features
- 46mm monotube body
- Zinc plated finish
- Collapsed length of 9.41 in. and extended length of 13.88 in.
- Universal fit, not tied to a specific vehicle
Choosing a universal shock
A universal fit shock is chosen by its dimensions rather than by a vehicle name. Start with the mount-to-mount distance at ride height and at full droop, then compare those numbers with the collapsed and extended lengths of the new unit. The shock should sit inside its travel range at both points without binding or hitting the frame.
Mount style matters as much as length. Eye, stem and bushing types need to match your brackets, and a mismatched bushing will load the shock at an angle. Replace worn bushings and hardware during the same job, since loose mounts wear a new shock quickly. Keep the boot and body clean, and inspect them after rough trail runs.
- Measure at ride height and full droop
- Match eye or stem style to each bracket
- Replace worn hardware with the shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-230306 |
| UPC | 651860729381 |
| Shock series | 5125 Series |
| Body diameter | 46mm monotube |
| Collapsed length | 9.41 in. |
| Extended length | 13.88 in. |
| Finish | Zinc |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicle is tied to this shock. It is a universal fit, but the 9.41 in. collapsed and 13.88 in. extended lengths still have to suit your mounts. Verify your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering, and compare the lengths with your existing shock.
Installation notes
Check the 9.41 in. collapsed and 13.88 in. extended lengths against your mounting points first, because a universal fit shock is not matched to a particular vehicle.
What’s included
One shock absorber, part number 33-230306. Mounting hardware is not included in the package.









