Overview
The Bilstein 24-029032 is a 4600 Series monotube shock absorber with a 2 in body, yellow finish and boots included. It fits the 1999–2006 and 2007 Chevrolet Silverado 1500 and GMC Sierra 1500 models. Its front or rear position should be confirmed before fitting.
The monotube is gas-charged, and heat leaves the oil through the outer body. A dividing piston absorbs the oil’s expansion, which reduces aeration and viscosity loss. The tube is seamless and extruded to a tight tolerance, and the piston head can be tuned separately for compression and rebound. The same construction is used across the 4600 Series.
Key features
- Monotube, gas-charged body in yellow
- Dividing piston for oil expansion under heat
- Extruded tube held to tight tolerance
- Seamless tube said to maximize heat dissipation
- Compression and rebound tuning in the piston head
- Boots included
Tips for truck owners
Pickup trucks carry varied loads, from empty bed driving to towing or hauling gear. The rear shocks respond to that weight by changing how quickly the body settles after a bump. A monotube design keeps the damping consistent under those changes, which helps the truck track steady on rough pavement and dirt roads.
Ride height and tire size both change how the shock works, so consider them before you choose a replacement. A change in tire diameter or a lift can shift the shock’s travel and angle. Inspect the mounts and bushings after installation, and recheck them after the first few weeks of driving.
- Check mount bushings after the first few weeks
- Match ride height before choosing damping
- Inspect boots for tears after off-road use
- Replace paired shocks together
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-029032 |
| UPC | 651860435749 |
| Series | 4600 Series |
| Shock type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Reservoir | No |
| Finish | Yellow |
| Boots | Included |
| Mounting type | Direct Fit |
Vehicle fitment
It fits the 1999–2006 Chevrolet Silverado 1500 in Base, Hybrid, LS, LT and WT trims, the 2007 Silverado 1500 Classic in Hybrid, LS, LT and WT trims, the 1999–2006 GMC Sierra 1500 in Base, HT, Hybrid, SL, SLE, SLT and WT trims, and the 2007 Sierra 1500 Classic in Hybrid, SL, SLE, SLT and WT trims. Check the mounting points against the shock you are replacing.
Silverado 2500 and 3500 models and other years are outside the ranges above. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
The shock absorber comes with boots. Check the mounting hardware you need against your installation before starting.









